diff --git a/gui/cppcheck_de.ts b/gui/cppcheck_de.ts index a9429aa1c94..f89eb60e4a8 100644 --- a/gui/cppcheck_de.ts +++ b/gui/cppcheck_de.ts @@ -614,14 +614,14 @@ Parameter: -l(line) (file) - + Show errors Zeige Fehler - + Show warnings Zeige Warnungen @@ -637,8 +637,8 @@ Parameter: -l(line) (file) Zeige &versteckte - - + + Information Information @@ -1047,18 +1047,18 @@ Parameter: -l(line) (file) &Hilfe - - + + Quick Filter: Schnellfilter: - + Select configuration Konfiguration wählen - + Found project file: %1 Do you want to load this project file instead? @@ -1067,102 +1067,102 @@ Do you want to load this project file instead? Möchten Sie stattdessen diese öffnen? - + File not found Datei nicht gefunden - + Bad XML Fehlerhaftes XML - + Missing attribute Fehlendes Attribut - + Bad attribute value Falscher Attributwert - + Duplicate platform type Plattformtyp doppelt - + Platform type redefined Plattformtyp neu definiert - + Duplicate define - + Failed to load the selected library '%1'. %2 Laden der ausgewählten Bibliothek '%1' schlug fehl. %2 - + File not found: '%1' - + Failed to load/setup addon %1: %2 - + Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located. Please note that --data-dir is supposed to be used by installation scripts and therefore the GUI does not start when it is used, all that happens is that the setting is configured. Analysis is aborted. - + Failed to load %1 - %2 Analysis is aborted. - - + + %1 Analysis is aborted. - + License Lizenz - + Authors Autoren - + Save the report file Speichert die Berichtdatei - - + + XML files (*.xml) XML-Dateien (*.xml) - + There was a problem with loading the editor application settings. This is probably because the settings were changed between the Cppcheck versions. Please check (and fix) the editor application settings, otherwise the editor program might not start correctly. @@ -1171,32 +1171,32 @@ This is probably because the settings were changed between the Cppcheck versions Dies wurde vermutlich durch einen Wechsel der Cppcheck-Version hervorgerufen. Bitte prüfen (und korrigieren) Sie die Einstellungen, andernfalls könnte die Editor-Anwendung nicht korrekt starten. - + You must close the project file before selecting new files or directories! Sie müssen die Projektdatei schließen, bevor Sie neue Dateien oder Verzeichnisse auswählen! - + The library '%1' contains unknown elements: %2 Die Bibliothek '%1' enthält unbekannte Elemente: %2 - + Unsupported format Nicht unterstütztes Format - + Unknown element Unbekanntes Element - - - - + + + + Error Fehler @@ -1205,50 +1205,50 @@ Dies wurde vermutlich durch einen Wechsel der Cppcheck-Version hervorgerufen. Bi Laden von %1 fehlgeschlagen. Ihre Cppcheck-Installation ist defekt. Sie können --data-dir=<Verzeichnis> als Kommandozeilenparameter verwenden, um anzugeben, wo die Datei sich befindet. Bitte beachten Sie, dass --data-dir in Installationsroutinen genutzt werden soll, und die GUI bei dessen Nutzung nicht startet, sondern die Einstellungen konfiguriert. - + Open the report file Berichtdatei öffnen - + Text files (*.txt) Textdateien (*.txt) - + CSV files (*.csv) CSV-Dateien (*.csv) - + Project files (*.cppcheck);;All files(*.*) Projektdateien (*.cppcheck);;Alle Dateien(*.*) - + Select Project File Projektdatei auswählen - - - - + + + + Project: Projekt: - + No suitable files found to analyze! Keine passenden Dateien für Analyse gefunden! - + C/C++ Source C/C++-Quellcode - + Compile database Compilerdatenbank @@ -1261,22 +1261,22 @@ Dies wurde vermutlich durch einen Wechsel der Cppcheck-Version hervorgerufen. Bi Borland C++-Builder 6 - + Select files to analyze Dateien für Analyse auswählen - + Select directory to analyze Verzeichnis für Analyse auswählen - + Select the configuration that will be analyzed Zu analysierende Konfiguration auswählen - + Found project files from the directory. Do you want to proceed analysis without using any of these project files? @@ -1285,7 +1285,7 @@ Do you want to proceed analysis without using any of these project files? - + Current results will be cleared. Opening a new XML file will clear current results. @@ -1296,7 +1296,7 @@ Eine neue XML-Datei zu öffnen wird die aktuellen Ergebnisse löschen Möchten sie fortfahren? - + Analyzer is running. Do you want to stop the analysis and exit Cppcheck? @@ -1305,104 +1305,104 @@ Do you want to stop the analysis and exit Cppcheck? Wollen sie die Analyse abbrechen und Cppcheck beenden? - + About - + XML files (*.xml);;Text files (*.txt);;CSV files (*.csv) XML-Dateien (*.xml);;Textdateien (*.txt);;CSV-Dateien (*.csv) - + Build dir '%1' does not exist, create it? Erstellungsverzeichnis '%1' existiert nicht. Erstellen? - + To check the project using addons, you need a build directory. - + Failed to open file - + Unknown project file format - + Failed to import project file - + Failed to import '%1': %2 Analysis is stopped. - + Failed to import '%1' (%2), analysis is stopped - + Show Mandatory - + Show Required - + Show Advisory - + Show Document - + Show L1 - + Show L2 - + Show L3 - + Show style - + Show portability - + Show performance - + Show information @@ -1411,22 +1411,22 @@ Analysis is stopped. Import von '%1' fehlgeschlagen; Analyse wurde abgebrochen. - + Project files (*.cppcheck) Projektdateien (*.cppcheck) - + Select Project Filename Projektnamen auswählen - + No project file loaded Keine Projektdatei geladen - + The project file %1 @@ -1443,12 +1443,12 @@ Do you want to remove the file from the recently used projects -list? Möchten Sie die Datei von der Liste der zuletzt benutzten Projekte entfernen? - + Install - + New version available: %1. %2 @@ -1959,17 +1959,17 @@ Options: Projektdatei: %1 - + Select Cppcheck build dir Wähle Cppcheck-Erstellungsverzeichnis - + Select include directory Wähle Include-Verzeichnisse - + Select a directory to check Wähle zu prüfendes Verzeichnis @@ -1988,7 +1988,7 @@ Options: Visual Studio - + Compile database Compilerdatenbank @@ -1997,48 +1997,48 @@ Options: Borland C++-Builder 6 - + Import Project Projekt importieren - + C/C++ header - + Include file - + Select directory to ignore Wähle zu ignorierendes Verzeichnis - + Source files Quelltext-Dateien - - + + All files Alle Dateien - + Exclude file Datei ausschließen - + Select MISRA rule texts file Wähle MISRA-Regeltext-Datei - + MISRA rule texts file (%1) MISRA-Regeltext-Datei (%1) @@ -2518,42 +2518,42 @@ Legen Sie unter dem Menü Ansicht fest, welche Arten von Fehlern angezeigt werde Id - + Clear Log Protokoll leeren - + Copy this Log entry Diesen Protokolleintrag kopieren - + Copy complete Log Gesamtes Protokoll kopieren - + Analysis was stopped Analyse wurde gestoppt - + There was a critical error with id '%1' Kritischer Fehler mit ID '%1' aufgetreten - + when checking %1 beim Prüfen von %1 - + when checking a file beim Prüfen einer Datei - + Analysis was aborted. Analyse abgebrochen. diff --git a/gui/cppcheck_es.ts b/gui/cppcheck_es.ts index fa03b4457cc..0230aaa69e4 100644 --- a/gui/cppcheck_es.ts +++ b/gui/cppcheck_es.ts @@ -558,13 +558,13 @@ Parameters: -l(line) (file) - + Show errors Mostrar errores - - + + Information Información @@ -953,7 +953,7 @@ Parameters: -l(line) (file) - + Show warnings Mostrar advertencias @@ -969,124 +969,124 @@ Parameters: -l(line) (file) Mostrar &ocultos - + There was a problem with loading the editor application settings. This is probably because the settings were changed between the Cppcheck versions. Please check (and fix) the editor application settings, otherwise the editor program might not start correctly. - + You must close the project file before selecting new files or directories! ¡Tienes que cerrar el proyecto antes de seleccionar nuevos ficheros o carpetas! - + Select configuration - + File not found Archivo no encontrado - + Bad XML XML malformado - + Missing attribute Falta el atributo - + Bad attribute value - + Unsupported format Formato no soportado - + Duplicate define - + Failed to load the selected library '%1'. %2 - + File not found: '%1' - + Failed to load/setup addon %1: %2 - + Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located. Please note that --data-dir is supposed to be used by installation scripts and therefore the GUI does not start when it is used, all that happens is that the setting is configured. Analysis is aborted. - + Failed to load %1 - %2 Analysis is aborted. - - + + %1 Analysis is aborted. - - + + XML files (*.xml) Archivos XML (*.xml) - + Open the report file Abrir informe - + License Licencia - + Authors Autores - + Save the report file Guardar informe - - + + Quick Filter: Filtro rápido: - + Found project file: %1 Do you want to load this project file instead? @@ -1095,102 +1095,102 @@ Do you want to load this project file instead? ¿Quiere cargar este fichero de proyecto en su lugar? - + The library '%1' contains unknown elements: %2 La biblioteca '%1' contiene elementos deconocidos: %2 - + Duplicate platform type - + Platform type redefined - + Unknown element - - - - + + + + Error Error - + Text files (*.txt) Ficheros de texto (*.txt) - + CSV files (*.csv) Ficheros CVS (*.cvs) - + Project files (*.cppcheck);;All files(*.*) Ficheros de proyecto (*.cppcheck;;Todos los ficheros (*.*) - + Select Project File Selecciona el archivo de proyecto - - - - + + + + Project: Proyecto: - + No suitable files found to analyze! - + C/C++ Source - + Compile database - + Select files to analyze - + Select directory to analyze - + Select the configuration that will be analyzed - + Found project files from the directory. Do you want to proceed analysis without using any of these project files? - + Current results will be cleared. Opening a new XML file will clear current results. @@ -1198,76 +1198,76 @@ Do you want to proceed? - + Analyzer is running. Do you want to stop the analysis and exit Cppcheck? - + About - + XML files (*.xml);;Text files (*.txt);;CSV files (*.csv) - + Build dir '%1' does not exist, create it? - + To check the project using addons, you need a build directory. - + Failed to open file - + Unknown project file format - + Failed to import project file - + Failed to import '%1': %2 Analysis is stopped. - + Failed to import '%1' (%2), analysis is stopped - + Project files (*.cppcheck) - + Select Project Filename Selecciona el nombre del proyecto - + No project file loaded No hay ningún proyecto cargado - + The project file %1 @@ -1284,67 +1284,67 @@ Do you want to remove the file from the recently used projects -list? ¿Quiere eliminar el fichero de la lista de proyectos recientes? - + Install - + New version available: %1. %2 - + Show Mandatory - + Show Required - + Show Advisory - + Show Document - + Show L1 - + Show L2 - + Show L3 - + Show style - + Show portability - + Show performance - + Show information @@ -1844,17 +1844,17 @@ Options: Archivo de proyecto: %1 - + Select Cppcheck build dir - + Select include directory Selecciona una carpeta para incluir - + Select a directory to check Selecciona la carpeta a comprobar @@ -1869,53 +1869,53 @@ Options: - + Compile database - + Import Project - + C/C++ header - + Include file - + Select directory to ignore Selecciona la carpeta a ignorar - + Source files - - + + All files - + Exclude file - + Select MISRA rule texts file - + MISRA rule texts file (%1) @@ -2431,42 +2431,42 @@ Para cambiar el tipo de comportamiento, abra el menú Ver. Id - + Clear Log - + Copy this Log entry - + Copy complete Log - + Analysis was stopped - + There was a critical error with id '%1' - + when checking %1 - + when checking a file - + Analysis was aborted. diff --git a/gui/cppcheck_fi.ts b/gui/cppcheck_fi.ts index bf379534998..8bdd6fd1671 100644 --- a/gui/cppcheck_fi.ts +++ b/gui/cppcheck_fi.ts @@ -550,14 +550,14 @@ Parameters: -l(line) (file) - + Show errors - + Show warnings @@ -573,8 +573,8 @@ Parameters: -l(line) (file) - - + + Information @@ -972,225 +972,225 @@ Parameters: -l(line) (file) &Ohje - - + + Quick Filter: - + Select configuration - + Found project file: %1 Do you want to load this project file instead? - + File not found - + Bad XML - + Missing attribute - + Bad attribute value - + Duplicate define - + Failed to load the selected library '%1'. %2 - + File not found: '%1' - + Failed to load/setup addon %1: %2 - + Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located. Please note that --data-dir is supposed to be used by installation scripts and therefore the GUI does not start when it is used, all that happens is that the setting is configured. Analysis is aborted. - + Failed to load %1 - %2 Analysis is aborted. - - + + %1 Analysis is aborted. - + License Lisenssi - + Authors Tekijät - + Save the report file Tallenna raportti - - + + XML files (*.xml) XML-tiedostot (*xml) - + There was a problem with loading the editor application settings. This is probably because the settings were changed between the Cppcheck versions. Please check (and fix) the editor application settings, otherwise the editor program might not start correctly. - + You must close the project file before selecting new files or directories! - + The library '%1' contains unknown elements: %2 - + Unsupported format - + Duplicate platform type - + Platform type redefined - + Unknown element - - - - + + + + Error - + Open the report file - + Text files (*.txt) Tekstitiedostot (*.txt) - + CSV files (*.csv) - + Project files (*.cppcheck);;All files(*.*) - + Select Project File - - - - + + + + Project: - + No suitable files found to analyze! - + C/C++ Source - + Compile database - + Select files to analyze - + Select directory to analyze - + Select the configuration that will be analyzed - + Found project files from the directory. Do you want to proceed analysis without using any of these project files? - + Current results will be cleared. Opening a new XML file will clear current results. @@ -1198,76 +1198,76 @@ Do you want to proceed? - + Analyzer is running. Do you want to stop the analysis and exit Cppcheck? - + About - + XML files (*.xml);;Text files (*.txt);;CSV files (*.csv) - + Build dir '%1' does not exist, create it? - + To check the project using addons, you need a build directory. - + Failed to open file - + Unknown project file format - + Failed to import project file - + Failed to import '%1': %2 Analysis is stopped. - + Failed to import '%1' (%2), analysis is stopped - + Project files (*.cppcheck) - + Select Project Filename - + No project file loaded - + The project file %1 @@ -1278,67 +1278,67 @@ Do you want to remove the file from the recently used projects -list? - + Install - + New version available: %1. %2 - + Show Mandatory - + Show Required - + Show Advisory - + Show Document - + Show L1 - + Show L2 - + Show L3 - + Show style - + Show portability - + Show performance - + Show information @@ -1818,17 +1818,17 @@ Options: - + Select Cppcheck build dir - + Select include directory - + Select a directory to check @@ -1843,53 +1843,53 @@ Options: - + Compile database - + Import Project - + C/C++ header - + Include file - + Select directory to ignore - + Source files - - + + All files - + Exclude file - + Select MISRA rule texts file - + MISRA rule texts file (%1) @@ -2365,42 +2365,42 @@ Määrittääksesi minkä tyyppisiä virheitä näytetään, avaa näkymä valik - + Clear Log - + Copy this Log entry - + Copy complete Log - + Analysis was stopped - + There was a critical error with id '%1' - + when checking %1 - + when checking a file - + Analysis was aborted. diff --git a/gui/cppcheck_fr.ts b/gui/cppcheck_fr.ts index 6d464bc46af..ca25352e60c 100644 --- a/gui/cppcheck_fr.ts +++ b/gui/cppcheck_fr.ts @@ -578,38 +578,38 @@ Paramètres : -l(ligne) (fichier) - + License Licence - + Authors Auteurs - + Save the report file Sauvegarder le rapport - - + + XML files (*.xml) Fichiers XML (*.xml) - + About - + Text files (*.txt) Fichiers Texte (*.txt) - + CSV files (*.csv) Fichiers CSV (*.csv) @@ -632,7 +632,7 @@ Paramètres : -l(ligne) (fichier) - + Show errors Afficher les erreurs @@ -704,7 +704,7 @@ Paramètres : -l(ligne) (fichier) - + Show warnings Afficher les avertissements @@ -720,8 +720,8 @@ Paramètres : -l(ligne) (fichier) - - + + Information Information @@ -736,134 +736,134 @@ Paramètres : -l(ligne) (fichier) Afficher les problèmes de portabilité - + You must close the project file before selecting new files or directories! Vous devez d'abord fermer le projet avant de choisir des fichiers/répertoires - + Open the report file Ouvrir le rapport - + Project files (*.cppcheck);;All files(*.*) - + Select Project File - + To check the project using addons, you need a build directory. - + Failed to open file - + Unknown project file format - + Failed to import project file - + Failed to import '%1': %2 Analysis is stopped. - + Failed to import '%1' (%2), analysis is stopped - + Select Project Filename - + No project file loaded - + Install - + New version available: %1. %2 - + Show Mandatory - + Show Required - + Show Advisory - + Show Document - + Show L1 - + Show L2 - + Show L3 - + Show style - + Show portability - + Show performance - + Show information - + There was a problem with loading the editor application settings. This is probably because the settings were changed between the Cppcheck versions. Please check (and fix) the editor application settings, otherwise the editor program might not start correctly. @@ -880,28 +880,28 @@ This is probably because the settings were changed between the Cppcheck versions - - + + Quick Filter: Filtre rapide : - + Found project file: %1 Do you want to load this project file instead? - - - - + + + + Project: Projet : - + The project file %1 @@ -952,59 +952,59 @@ Do you want to remove the file from the recently used projects -list? - - - - + + + + Error Erreur - + File not found Fichier introuvable - + Bad XML Mauvais fichier XML - + Missing attribute Attribut manquant - + Bad attribute value Mauvaise valeur d'attribut - + Failed to load the selected library '%1'. %2 Echec lors du chargement de la bibliothèque '%1'. %2 - + Unsupported format Format non supporté - + The library '%1' contains unknown elements: %2 La bibliothèque '%1' contient des éléments inconnus: %2 - + Duplicate platform type - + Platform type redefined @@ -1034,12 +1034,12 @@ Do you want to remove the file from the recently used projects -list? - + Unknown element - + Select configuration @@ -1062,7 +1062,7 @@ Options: - + Build dir '%1' does not exist, create it? @@ -1090,76 +1090,76 @@ Options: - + XML files (*.xml);;Text files (*.txt);;CSV files (*.csv) - + No suitable files found to analyze! - + Select files to analyze - + Select directory to analyze - + Select the configuration that will be analyzed - + Found project files from the directory. Do you want to proceed analysis without using any of these project files? - + Duplicate define - + File not found: '%1' - + Failed to load/setup addon %1: %2 - + Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located. Please note that --data-dir is supposed to be used by installation scripts and therefore the GUI does not start when it is used, all that happens is that the setting is configured. Analysis is aborted. - + Failed to load %1 - %2 Analysis is aborted. - - + + %1 Analysis is aborted. - + Analyzer is running. Do you want to stop the analysis and exit Cppcheck? @@ -1306,7 +1306,7 @@ Do you want to stop the analysis and exit Cppcheck? - + Project files (*.cppcheck) @@ -1331,17 +1331,17 @@ Do you want to stop the analysis and exit Cppcheck? - + C/C++ Source - + Compile database - + Current results will be cleared. Opening a new XML file will clear current results. @@ -1787,27 +1787,27 @@ Do you want to proceed? Fichier projet : %1 - + Select include directory Selectionner un répertoire à inclure - + Select directory to ignore Selectionner un répertoire à ignorer - + Select a directory to check Selectionner un répertoire à vérifier - + Select Cppcheck build dir - + Import Project @@ -1822,43 +1822,43 @@ Do you want to proceed? - + Source files - - + + All files - + C/C++ header - + Include file - + Exclude file - + Select MISRA rule texts file - + MISRA rule texts file (%1) - + Compile database @@ -2307,27 +2307,27 @@ To toggle what kind of errors are shown, open view menu. Pour configurer les erreurs affichées, ouvrez le menu d'affichage. - + Analysis was stopped - + There was a critical error with id '%1' - + when checking %1 - + when checking a file - + Analysis was aborted. @@ -2389,17 +2389,17 @@ Pour configurer les erreurs affichées, ouvrez le menu d'affichage. - + Clear Log - + Copy this Log entry - + Copy complete Log diff --git a/gui/cppcheck_it.ts b/gui/cppcheck_it.ts index 65b31b59b1e..243b0be7d51 100644 --- a/gui/cppcheck_it.ts +++ b/gui/cppcheck_it.ts @@ -559,14 +559,14 @@ Parametri: -l(line) (file) - + Show errors Mostra gli errori - + Show warnings Mostra gli avvisi @@ -582,8 +582,8 @@ Parametri: -l(line) (file) Mostra &i nascosti - - + + Information Informazione @@ -981,18 +981,18 @@ Parametri: -l(line) (file) &Aiuto - - + + Quick Filter: Rapido filtro: - + Select configuration - + Found project file: %1 Do you want to load this project file instead? @@ -1001,96 +1001,96 @@ Do you want to load this project file instead? Vuoi piuttosto caricare questo file di progetto? - + File not found - + Bad XML - + Missing attribute - + Bad attribute value - + Unsupported format - + Duplicate define - + Failed to load the selected library '%1'. %2 - + File not found: '%1' - + Failed to load/setup addon %1: %2 - + Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located. Please note that --data-dir is supposed to be used by installation scripts and therefore the GUI does not start when it is used, all that happens is that the setting is configured. Analysis is aborted. - + Failed to load %1 - %2 Analysis is aborted. - - + + %1 Analysis is aborted. - + License Licenza - + Authors Autori - + Save the report file Salva il file di rapporto - - + + XML files (*.xml) File XML (*.xml) - + There was a problem with loading the editor application settings. This is probably because the settings were changed between the Cppcheck versions. Please check (and fix) the editor application settings, otherwise the editor program might not start correctly. @@ -1099,111 +1099,111 @@ This is probably because the settings were changed between the Cppcheck versions Probabilmente ciò è avvenuto perché le impostazioni sono state modificate tra le versioni di Cppcheck. Per favore controlla (e sistema) le impostazioni delle applicazioni editor, altrimenti il programma editor può non partire correttamente. - + You must close the project file before selecting new files or directories! Devi chiudere il file di progetto prima di selezionare nuovi file o cartelle! - + The library '%1' contains unknown elements: %2 - + Duplicate platform type - + Platform type redefined - + Unknown element - - - - + + + + Error - + Open the report file Apri il file di rapporto - + Text files (*.txt) File di testo (*.txt) - + CSV files (*.csv) Files CSV (*.csv) - + Project files (*.cppcheck);;All files(*.*) Files di progetto (*.cppcheck);;Tutti i files(*.*) - + Select Project File Seleziona il file di progetto - - - - + + + + Project: Progetto: - + No suitable files found to analyze! - + C/C++ Source - + Compile database - + Select files to analyze - + Select directory to analyze - + Select the configuration that will be analyzed - + Found project files from the directory. Do you want to proceed analysis without using any of these project files? - + Current results will be cleared. Opening a new XML file will clear current results. @@ -1211,76 +1211,76 @@ Do you want to proceed? - + Analyzer is running. Do you want to stop the analysis and exit Cppcheck? - + About - + XML files (*.xml);;Text files (*.txt);;CSV files (*.csv) - + Build dir '%1' does not exist, create it? - + To check the project using addons, you need a build directory. - + Failed to open file - + Unknown project file format - + Failed to import project file - + Failed to import '%1': %2 Analysis is stopped. - + Failed to import '%1' (%2), analysis is stopped - + Project files (*.cppcheck) - + Select Project Filename Seleziona il nome del file di progetto - + No project file loaded Nessun file di progetto caricato - + The project file %1 @@ -1297,67 +1297,67 @@ Do you want to remove the file from the recently used projects -list? Vuoi rimuovere il file dalla lista dei progetti recentemente usati? - + Install - + New version available: %1. %2 - + Show Mandatory - + Show Required - + Show Advisory - + Show Document - + Show L1 - + Show L2 - + Show L3 - + Show style - + Show portability - + Show performance - + Show information @@ -1857,17 +1857,17 @@ Options: File di progetto: %1 - + Select Cppcheck build dir - + Select include directory Seleziona la cartella da includere - + Select a directory to check Seleziona una cartella da scansionare @@ -1882,53 +1882,53 @@ Options: - + Compile database - + Import Project - + C/C++ header - + Include file - + Select directory to ignore Seleziona la cartella da ignorare - + Source files - - + + All files - + Exclude file - + Select MISRA rule texts file - + MISRA rule texts file (%1) @@ -2417,42 +2417,42 @@ Per vedere il tipo di errori che sono mostrati, apri il menu Visualizza.Id - + Clear Log - + Copy this Log entry - + Copy complete Log - + Analysis was stopped - + There was a critical error with id '%1' - + when checking %1 - + when checking a file - + Analysis was aborted. diff --git a/gui/cppcheck_ja.ts b/gui/cppcheck_ja.ts index eedad8e9515..dcbe8418942 100644 --- a/gui/cppcheck_ja.ts +++ b/gui/cppcheck_ja.ts @@ -635,13 +635,13 @@ Parameters: -l(line) (file) - + Show errors エラーを表示 - - + + Information 情報 @@ -748,7 +748,7 @@ Parameters: -l(line) (file) - + Show warnings 警告を表示 @@ -1066,7 +1066,7 @@ Parameters: -l(line) (file) スレッド詳細を表示 - + There was a problem with loading the editor application settings. This is probably because the settings were changed between the Cppcheck versions. Please check (and fix) the editor application settings, otherwise the editor program might not start correctly. @@ -1075,23 +1075,23 @@ This is probably because the settings were changed between the Cppcheck versions Cppcheckの古いバージョンの設定には互換性がありません。エディタアプリケーションの設定を確認して修正してください、そうしないと正しく起動できないかもしれません。 - + You must close the project file before selecting new files or directories! 新しいファイル／ディレクトリをチェックするには現在のプロジェクトを閉じてください! - - + + Quick Filter: クイックフィルタ： - + Select configuration コンフィグレーションの選択 - + Found project file: %1 Do you want to load this project file instead? @@ -1100,64 +1100,64 @@ Do you want to load this project file instead? 現在のプロジェクトの代わりにこのプロジェクトファイルを読み込んでもかまいませんか？ - + The library '%1' contains unknown elements: %2 このライブラリ '%1' には次の不明な要素が含まれています。 %2 - + File not found ファイルがありません - + Bad XML 不正なXML - + Missing attribute 属性がありません - + Bad attribute value 不正な属性があります - + Unsupported format サポートされていないフォーマット - + Duplicate platform type プラットフォームの種類が重複しています - + Platform type redefined プラットフォームの種類が再定義されました - + Unknown element 不明な要素 - + Failed to load the selected library '%1'. %2 選択したライブラリの読み込みに失敗しました '%1' %2 - - - - + + + + Error エラー @@ -1170,38 +1170,38 @@ Do you want to load this project file instead? %1 - %2 の読み込みに失敗 - - + + XML files (*.xml) XML ファイル (*.xml) - + Open the report file レポートを開く - + License ライセンス - + Authors 作者 - + Save the report file レポートを保存 - + Text files (*.txt) テキストファイル (*.txt) - + CSV files (*.csv) CSV形式ファイル (*.csv) @@ -1210,32 +1210,32 @@ Do you want to load this project file instead? コンプライアンスレポートをすぐに生成できません。解析が完了し成功していなければなりません。コードを再解析して、致命的なエラーがないことを確認してください。 - + Project files (*.cppcheck);;All files(*.*) プロジェクトファイル (*.cppcheck);;すべてのファイル(*.*) - + Select Project File プロジェクトファイルを選択 - + Failed to open file ファイルを開くのに失敗しました - + Unknown project file format プロジェクトファイルの形式が不明です - + Failed to import project file プロジェクトファイルのインポートに失敗しました - + Failed to import '%1': %2 Analysis is stopped. @@ -1244,40 +1244,40 @@ Analysis is stopped. 解析を停止しました。 - + Failed to import '%1' (%2), analysis is stopped '%1' (%2) のインポートに失敗しました。解析は停止 - + Install インストール - + New version available: %1. %2 新しいバージョンが利用可能です。: %1. %2 - - - - + + + + Project: プロジェクト: - + No suitable files found to analyze! チェック対象のファイルがみつかりません! - + C/C++ Source C/C++のソースコード - + Compile database コンパイルデータベース @@ -1290,22 +1290,22 @@ Analysis is stopped. Borland C++ Builder 6 - + Select files to analyze チェック対象のファイルを選択 - + Select directory to analyze チェックするディレクトリを選択してください - + Select the configuration that will be analyzed チェックの設定を選択 - + Found project files from the directory. Do you want to proceed analysis without using any of these project files? @@ -1314,37 +1314,37 @@ Do you want to proceed analysis without using any of these project files? - + Duplicate define 重複した定義 - + File not found: '%1' ファイルがありません: '%1' - + Failed to load/setup addon %1: %2 アドオンの読み込みまたは設定に失敗 %1 - %2 - + Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located. Please note that --data-dir is supposed to be used by installation scripts and therefore the GUI does not start when it is used, all that happens is that the setting is configured. Analysis is aborted. %1のロードに失敗しました。あなたの Cppcheck は正しくインストールされていません。あなたは --data-dir=<directory> コマンドラインオプションを使ってこのファイルの場所を指定できます。ただし、この --data-dir はインストールスクリプトによって使用されていなければなりません。またGUI版はこれを使用しません。さらに、全ての設定は調整済みでなければなりません。 - + Failed to load %1 - %2 Analysis is aborted. 読み込みに失敗 %1 - %2 - - + + %1 Analysis is aborted. @@ -1353,7 +1353,7 @@ Analysis is aborted. 解析は中止した。 - + Current results will be cleared. Opening a new XML file will clear current results. @@ -1363,7 +1363,7 @@ Do you want to proceed? 新しくXMLファイルを開くと現在の結果が削除されます。実行しますか？ - + Analyzer is running. Do you want to stop the analysis and exit Cppcheck? @@ -1372,77 +1372,77 @@ Do you want to stop the analysis and exit Cppcheck? チェックを中断して、Cppcheckを終了しますか? - + About CppCheckについて - + XML files (*.xml);;Text files (*.txt);;CSV files (*.csv) XML ファイル (*.xml);;テキストファイル (*.txt);;CSVファイル (*.csv) - + Build dir '%1' does not exist, create it? ビルドディレクトリ'%1'がありません。作成しますか? - + To check the project using addons, you need a build directory. アドオンを使用してプロジェクトをチェックするためには、ビルドディレクトリが必要です。 - + Show Mandatory 必須を表示 - + Show Required 要求を表示 - + Show Advisory 推奨を表示 - + Show Document ドキュメントを表示 - + Show L1 L1を表示 - + Show L2 L2を表示 - + Show L3 L3を表示 - + Show style スタイルを表示 - + Show portability 移植可能性を表示 - + Show performance パフォーマンスを表示 - + Show information 情報を表示 @@ -1451,22 +1451,22 @@ Do you want to stop the analysis and exit Cppcheck? '%1'のインポートに失敗しました。(チェック中断) - + Project files (*.cppcheck) プロジェクトファイル (*.cppcheck) - + Select Project Filename プロジェクトファイル名を選択 - + No project file loaded プロジェクトファイルが読み込まれていません - + The project file %1 @@ -2008,17 +2008,17 @@ Options: プロジェクトファイル:%1 - + Select Cppcheck build dir Cppcheckビルドディレクトリ - + Select include directory includeディレクトリを選択 - + Select a directory to check チェックするディレクトリを選択してください @@ -2037,7 +2037,7 @@ Options: Visual Studio - + Compile database コンパイルデータベース @@ -2046,48 +2046,48 @@ Options: Borland C++ Builder 6 - + Import Project プロジェクトのインポート - + C/C++ header C/C++のヘッダー - + Include file ファイルのインクルード - + Select directory to ignore 除外するディレクトリを選択してください - + Source files ソースファイル - - + + All files 全ファイル - + Exclude file 除外ファイル - + Select MISRA rule texts file MISRAルールテキストファイルを選択 - + MISRA rule texts file (%1) MISRAルールテキストファイル (%1) @@ -2630,42 +2630,42 @@ To toggle what kind of errors are shown, open view menu. バグハントの解析は不完全です - + Clear Log ログの消去 - + Copy this Log entry このログ項目をコピー - + Copy complete Log ログ全体をコピー - + Analysis was stopped 解析は停止しした - + There was a critical error with id '%1' id '%1'の致命的なエラーがあります - + when checking %1 %1 をチェックするとき - + when checking a file ファイルをチェックするとき - + Analysis was aborted. 解析は中止した。 diff --git a/gui/cppcheck_ka.ts b/gui/cppcheck_ka.ts index 00239743df0..7464052e694 100644 --- a/gui/cppcheck_ka.ts +++ b/gui/cppcheck_ka.ts @@ -600,14 +600,14 @@ Parameters: -l(line) (file) - + Show errors შეცდომების ჩვენება - + Show warnings გაფრთხილების ჩვენება @@ -623,8 +623,8 @@ Parameters: -l(line) (file) დამალულის &ჩვენება - - + + Information ინფორმაცია @@ -1034,18 +1034,18 @@ Parameters: -l(line) (file) &დახმარება - - + + Quick Filter: სწრაფი ფილტრი: - + Select configuration აირჩიეთ კონფიგურაცია - + Found project file: %1 Do you want to load this project file instead? @@ -1054,61 +1054,61 @@ Do you want to load this project file instead? გნებავთ, სამაგიეროდ, ეს პროექტის ფაილი ჩატვირთოთ? - + File not found ფაილი ნაპოვნი არაა - + Bad XML არასწორი XML - + Missing attribute აკლია ატრიბუტი - + Bad attribute value არასწორი ატრიბუტის მნიშვნელობა - + Unsupported format მხარდაუჭერელი ფორმატი - + Duplicate define გამეორებული აღწერა - + Failed to load the selected library '%1'. %2 ჩავარდა ჩატვირთვა მონიშნული ბიბლიოთეკისთვის '%1'. %2 - + File not found: '%1' ფაილი ვერ ვიპოვე: '%1' - + Failed to load/setup addon %1: %2 დამატების (%1) ჩატვირთვა/მორგება ჩავარდა: %2 - + Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located. Please note that --data-dir is supposed to be used by installation scripts and therefore the GUI does not start when it is used, all that happens is that the setting is configured. Analysis is aborted. - + Failed to load %1 - %2 Analysis is aborted. @@ -1117,8 +1117,8 @@ Analysis is aborted. ანალიზი შეწყდა. - - + + %1 Analysis is aborted. @@ -1127,113 +1127,113 @@ Analysis is aborted. ანალიზი შეწყვეტილია. - + License ლიცენზია - + Authors ავტორები - + Save the report file ანგარიშის ფაილში ჩაწერა - - + + XML files (*.xml) XML ფაილები (*.xml) - + There was a problem with loading the editor application settings. This is probably because the settings were changed between the Cppcheck versions. Please check (and fix) the editor application settings, otherwise the editor program might not start correctly. - + You must close the project file before selecting new files or directories! ახალი ფაილების ან საქაღალდეების არჩევამდე პრორექტის ფაილი უნდა დახუროთ! - + The library '%1' contains unknown elements: %2 ბიბლიოთეკა '%1' უცნობ ელემენტებს შეიცავს: %2 - + Duplicate platform type გამეორებული პლატფორმის ტიპი - + Platform type redefined პლატფორმის ტიპი თავდან აღიწერა - + Unknown element უცნობი ელემენტი - - - - + + + + Error შეცდომა - + Open the report file ანგარიშის ფაილის გახსნა - + Text files (*.txt) ტექსტური ფაილები (*.txt) - + CSV files (*.csv) CSV ფაილები (*.csv) - + Project files (*.cppcheck);;All files(*.*) პროექტის ფაილები (*.cppcheck);;ყველა ფაილი(*.*) - + Select Project File აირჩიეთ პროექტის ფაილი - - - - + + + + Project: პროექტი: - + No suitable files found to analyze! ანალიზისათვის შესაფერისი ფაილები აღმოჩენილი არაა! - + C/C++ Source C/C++ საწყისი კოდი - + Compile database მონაცემთა ბაზის კომპილაცია @@ -1246,22 +1246,22 @@ This is probably because the settings were changed between the Cppcheck versions Borland C++ Builder 6 - + Select files to analyze აირჩეთ ფაილები ანალიზისთვის - + Select directory to analyze აირჩიეთ საქაღალდე ანალიზისთვის - + Select the configuration that will be analyzed აირჩიეთ კონფიგურაცია ანალიზისთვის - + Found project files from the directory. Do you want to proceed analysis without using any of these project files? @@ -1270,7 +1270,7 @@ Do you want to proceed analysis without using any of these project files? - + Current results will be cleared. Opening a new XML file will clear current results. @@ -1281,7 +1281,7 @@ Do you want to proceed? გნებავთ, გააგრძელოთ? - + Analyzer is running. Do you want to stop the analysis and exit Cppcheck? @@ -1290,12 +1290,12 @@ Do you want to stop the analysis and exit Cppcheck? გნებავთ, გააჩეროთ ანალიზი და გახვიდეთ Cppcheck-დან? - + About შესახებ - + XML files (*.xml);;Text files (*.txt);;CSV files (*.csv) XML ფაილები (*.xml);;ტექსტური ფაილები (*.txt);;CSV ფაილები (*.csv) @@ -1304,32 +1304,32 @@ Do you want to stop the analysis and exit Cppcheck? შესაბამისობის ანგარიშის გენერაცია ახლა შეუძლებელია, რადგან ჯერ ანალიზი წარმატებით უნდა დასრულდეს. სცადეთ, კოდის ანალიზი თავიდან გაუშვათ და დარწმუნდეთ, რომ კრიტიკული შეცდომები არ არსებობს. - + Build dir '%1' does not exist, create it? აგების საქაღალდე (%1) არ არსებობს. შევქმნა? - + To check the project using addons, you need a build directory. პროექტის დამატებებით შესამოწმებლად აგების საქაღალდე გჭირდებათ. - + Failed to open file ფაილის გახსნის შეცდომა - + Unknown project file format უცნობი პროექტის ფაილის ფორმატი - + Failed to import project file პროექტის ფაილის შემოტანა ჩავარდა - + Failed to import '%1': %2 Analysis is stopped. @@ -1338,27 +1338,27 @@ Analysis is stopped. ანალიზი შეწყდა. - + Failed to import '%1' (%2), analysis is stopped '%1'-ის (%2) შემოტანა ჩავარდა. ანალიზი შეწყდა - + Project files (*.cppcheck) პროექტის ფაილები (*.cppcheck) - + Select Project Filename აირჩიეთ პროექტის ფაილის სახელი - + No project file loaded პროექტის ფაილი ჩატვირთული არაა - + The project file %1 @@ -1375,67 +1375,67 @@ Do you want to remove the file from the recently used projects -list? გნებავთ წაშალოთ ეს ფაილი ახლახან გამოყენებული პროექტების სიიდან? - + Install დაყენება - + New version available: %1. %2 ხელმისაწვდომია ახალი ვერსია: %1. %2 - + Show Mandatory - + Show Required - + Show Advisory - + Show Document - + Show L1 - + Show L2 - + Show L3 - + Show style - + Show portability - + Show performance - + Show information @@ -1956,17 +1956,17 @@ Options: პროექტის ფაილი: %1 - + Select Cppcheck build dir აირჩიეთ Cppcheck-ის აგების საქაღალდე - + Select include directory აირჩიეთ ჩასასმელი საქაღალდე - + Select a directory to check აირჩიეთ შესამოწმებელი საქაღალდე @@ -1985,7 +1985,7 @@ Options: Visual Studio - + Compile database მონაცემთა ბაზის კომპილაცია @@ -1994,48 +1994,48 @@ Options: Borland C++ Builder 6 - + Import Project პროექტის შემოტანა - + C/C++ header - + Include file - + Select directory to ignore აირჩიეთ გამოსატოვებელი საქაღალდე - + Source files კოდის ფაილები - - + + All files ყველა ფაილი - + Exclude file ფაილის ამოღება - + Select MISRA rule texts file აირჩიეთ MISRA-ის წესების ტექსტის ფაილი - + MISRA rule texts file (%1) MISRA-ის წესის ტექსტების ფაილი (%1) @@ -2543,42 +2543,42 @@ To toggle what kind of errors are shown, open view menu. შეცდომებზე ნადირობის ანალიზი დაუსრულებელია - + Clear Log ჟურნალის გასუფთავება - + Copy this Log entry ამ ჟურნალის ჩანაწერის კოპირება - + Copy complete Log სრული ჟურნალის კოპირება - + Analysis was stopped ანალიზი გაუქმებულია - + There was a critical error with id '%1' აღმოჩენილია კრიტიკული შეცდომა id-ით '%1' - + when checking %1 %1-ის შემოწმებისას - + when checking a file ფაილის შემოწმებისას - + Analysis was aborted. ანალიზი შეწყვეტილია. diff --git a/gui/cppcheck_ko.ts b/gui/cppcheck_ko.ts index eef9ffac818..a7bae5f31f4 100644 --- a/gui/cppcheck_ko.ts +++ b/gui/cppcheck_ko.ts @@ -556,7 +556,7 @@ Kate로 파일을 열고, 해당 행으로 이동하는 예제: - + Show errors 애러 표시 @@ -663,7 +663,7 @@ Kate로 파일을 열고, 해당 행으로 이동하는 예제: - + Show warnings 경고 표시 @@ -709,8 +709,8 @@ Kate로 파일을 열고, 해당 행으로 이동하는 예제: - - + + Information 정보 @@ -760,13 +760,13 @@ Kate로 파일을 열고, 해당 행으로 이동하는 예제: Windows 64-bit - - + + Quick Filter: 빠른 필터: - + There was a problem with loading the editor application settings. This is probably because the settings were changed between the Cppcheck versions. Please check (and fix) the editor application settings, otherwise the editor program might not start correctly. @@ -775,12 +775,12 @@ This is probably because the settings were changed between the Cppcheck versions Cppcheck 버전간 설정 방법 차이때문인 것으로 보입니다. 편집기 설정을 검사(및 수정)해주세요, 그렇지 않으면 편집기가 제대로 시작하지 않습니다. - + You must close the project file before selecting new files or directories! 새로운 파일이나 디렉토리를 선택하기 전에 프로젝트 파일을 닫으세요! - + Found project file: %1 Do you want to load this project file instead? @@ -789,210 +789,210 @@ Do you want to load this project file instead? 이 프로젝트 파일을 불러오겠습니까? - - + + XML files (*.xml) XML 파일 (*.xml) - + Open the report file 보고서 파일 열기 - + License 저작권 - + Authors 제작자 - + Save the report file 보고서 파일 저장 - + Text files (*.txt) 텍스트 파일 (*.txt) - + CSV files (*.csv) CSV 파일 (*.csv) - + Project files (*.cppcheck);;All files(*.*) 프로젝트 파일 (*.cppcheck);;모든 파일(*.*) - + Select Project File 프로젝트 파일 선택 - + Failed to open file - + Unknown project file format - + Failed to import project file - + Failed to import '%1': %2 Analysis is stopped. - + Failed to import '%1' (%2), analysis is stopped - + Install - + New version available: %1. %2 - + Show Mandatory - + Show Required - + Show Advisory - + Show Document - + Show L1 - + Show L2 - + Show L3 - + Show style - + Show portability - + Show performance - + Show information - - - - + + + + Project: 프로젝트: - + Duplicate define - + File not found: '%1' - + Failed to load/setup addon %1: %2 - + Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located. Please note that --data-dir is supposed to be used by installation scripts and therefore the GUI does not start when it is used, all that happens is that the setting is configured. Analysis is aborted. - + Failed to load %1 - %2 Analysis is aborted. - - + + %1 Analysis is aborted. - + About - + To check the project using addons, you need a build directory. - + Select Project Filename 프로젝트 파일이름 선택 - + No project file loaded 프로젝트 파일 불러오기 실패 - + The project file %1 @@ -1019,57 +1019,57 @@ Do you want to remove the file from the recently used projects -list? - - - - + + + + Error - + File not found - + Bad XML - + Missing attribute - + Bad attribute value - + Failed to load the selected library '%1'. %2 - + Unsupported format - + The library '%1' contains unknown elements: %2 - + Duplicate platform type - + Platform type redefined @@ -1099,12 +1099,12 @@ Do you want to remove the file from the recently used projects -list? - + Unknown element - + Select configuration @@ -1127,7 +1127,7 @@ Options: - + Build dir '%1' does not exist, create it? @@ -1155,39 +1155,39 @@ Options: - + XML files (*.xml);;Text files (*.txt);;CSV files (*.csv) - + No suitable files found to analyze! - + Select files to analyze - + Select directory to analyze - + Select the configuration that will be analyzed - + Found project files from the directory. Do you want to proceed analysis without using any of these project files? - + Analyzer is running. Do you want to stop the analysis and exit Cppcheck? @@ -1334,7 +1334,7 @@ Do you want to stop the analysis and exit Cppcheck? C++14 - + Project files (*.cppcheck) @@ -1359,17 +1359,17 @@ Do you want to stop the analysis and exit Cppcheck? C++20 - + C/C++ Source - + Compile database - + Current results will be cleared. Opening a new XML file will clear current results. @@ -1835,27 +1835,27 @@ Do you want to proceed? 프로젝트 파일: %1 - + Select include directory Include 디렉토리 선택 - + Select a directory to check 검사할 디렉토리 선택 - + Select directory to ignore 무시할 디렉토리 선택 - + Select Cppcheck build dir - + Import Project @@ -1870,43 +1870,43 @@ Do you want to proceed? - + Source files - - + + All files - + C/C++ header - + Include file - + Exclude file - + Select MISRA rule texts file - + MISRA rule texts file (%1) - + Compile database @@ -2376,27 +2376,27 @@ To toggle what kind of errors are shown, open view menu. 결과 불러오기 실패. - + Analysis was stopped - + There was a critical error with id '%1' - + when checking %1 - + when checking a file - + Analysis was aborted. @@ -2441,17 +2441,17 @@ To toggle what kind of errors are shown, open view menu. - + Clear Log - + Copy this Log entry - + Copy complete Log diff --git a/gui/cppcheck_nl.ts b/gui/cppcheck_nl.ts index 6a877a34909..0c390ff245c 100644 --- a/gui/cppcheck_nl.ts +++ b/gui/cppcheck_nl.ts @@ -560,14 +560,14 @@ Parameters: -l(lijn) (bestand) - + Show errors Toon fouten - + Show warnings Toon waarschuwingen @@ -583,8 +583,8 @@ Parameters: -l(lijn) (bestand) Toon &verborgen - - + + Information Informatie @@ -982,18 +982,18 @@ Parameters: -l(lijn) (bestand) &Help - - + + Quick Filter: Snel Filter: - + Select configuration - + Found project file: %1 Do you want to load this project file instead? @@ -1001,91 +1001,91 @@ Do you want to load this project file instead? Wilt u dit project laden in plaats van? - + File not found - + Bad XML - + Missing attribute - + Bad attribute value - + Duplicate define - + Failed to load the selected library '%1'. %2 - + File not found: '%1' - + Failed to load/setup addon %1: %2 - + Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located. Please note that --data-dir is supposed to be used by installation scripts and therefore the GUI does not start when it is used, all that happens is that the setting is configured. Analysis is aborted. - + Failed to load %1 - %2 Analysis is aborted. - - + + %1 Analysis is aborted. - + License Licentie - + Authors Auteurs - + Save the report file Rapport opslaan - - + + XML files (*.xml) XML bestanden (*.xml) - + There was a problem with loading the editor application settings. This is probably because the settings were changed between the Cppcheck versions. Please check (and fix) the editor application settings, otherwise the editor program might not start correctly. @@ -1094,116 +1094,116 @@ This is probably because the settings were changed between the Cppcheck versions Dit is waarschijnlijk omdat de instellingen zijn gewijzigd tussen de versies van cppcheck. Controleer (en maak) de bewerker instellingen, anders zal de bewerker niet correct starten. - + You must close the project file before selecting new files or directories! Je moet project bestanden sluiten voordat je nieuwe bestanden of mappen selekteerd! - + The library '%1' contains unknown elements: %2 - + Unsupported format - + Duplicate platform type - + Platform type redefined - + Unknown element - - - - + + + + Error - + Open the report file Open het rapport bestand - + Text files (*.txt) Tekst bestanden (*.txt) - + CSV files (*.csv) CSV bestanden (*.csv) - + Project files (*.cppcheck);;All files(*.*) Project bestanden (*.cppcheck);;Alle bestanden(*.*) - + Select Project File Selecteer project bestand - - - - + + + + Project: Project: - + No suitable files found to analyze! - + C/C++ Source - + Compile database - + Select files to analyze - + Select directory to analyze - + Select the configuration that will be analyzed - + Found project files from the directory. Do you want to proceed analysis without using any of these project files? - + Current results will be cleared. Opening a new XML file will clear current results. @@ -1211,76 +1211,76 @@ Do you want to proceed? - + Analyzer is running. Do you want to stop the analysis and exit Cppcheck? - + About - + XML files (*.xml);;Text files (*.txt);;CSV files (*.csv) - + Build dir '%1' does not exist, create it? - + To check the project using addons, you need a build directory. - + Failed to open file - + Unknown project file format - + Failed to import project file - + Failed to import '%1': %2 Analysis is stopped. - + Failed to import '%1' (%2), analysis is stopped - + Project files (*.cppcheck) - + Select Project Filename Selecteer project bestandsnaam - + No project file loaded Geen project bestand geladen - + The project file %1 @@ -1296,67 +1296,67 @@ Kan niet worden gevonden! Wilt u het bestand van de onlangs gebruikte project verwijderen -lijst? - + Install - + New version available: %1. %2 - + Show Mandatory - + Show Required - + Show Advisory - + Show Document - + Show L1 - + Show L2 - + Show L3 - + Show style - + Show portability - + Show performance - + Show information @@ -1836,17 +1836,17 @@ Options: Project Bestand %1 - + Select Cppcheck build dir - + Select include directory Selecteer include map - + Select a directory to check Selecteer een map om te controleren @@ -1861,53 +1861,53 @@ Options: - + Compile database - + Import Project - + C/C++ header - + Include file - + Select directory to ignore Selecteer een map om te negeren - + Source files - - + + All files - + Exclude file - + Select MISRA rule texts file - + MISRA rule texts file (%1) @@ -2398,42 +2398,42 @@ Gebruik het uitzicht menu om te selecteren welke fouten getoond worden.Id - + Clear Log - + Copy this Log entry - + Copy complete Log - + Analysis was stopped - + There was a critical error with id '%1' - + when checking %1 - + when checking a file - + Analysis was aborted. diff --git a/gui/cppcheck_ru.ts b/gui/cppcheck_ru.ts index cd1a4c4d0ce..2eec05aa1b6 100644 --- a/gui/cppcheck_ru.ts +++ b/gui/cppcheck_ru.ts @@ -560,14 +560,14 @@ Parameters: -l(line) (file) - + Show errors Показать ошибки - + Show warnings Показать предупреждения @@ -583,8 +583,8 @@ Parameters: -l(line) (file) Показать скрытые - - + + Information Информационные сообщения @@ -982,18 +982,18 @@ Parameters: -l(line) (file) Помощь - - + + Quick Filter: Быстрый фильтр: - + Select configuration Выбор конфигурации - + Found project file: %1 Do you want to load this project file instead? @@ -1002,97 +1002,97 @@ Do you want to load this project file instead? Вы хотите загрузить этот проект? - + File not found Файл не найден - + Bad XML Некорректный XML - + Missing attribute Пропущен атрибут - + Bad attribute value Некорректное значение атрибута - + Unsupported format Неподдерживаемый формат - + Duplicate define - + Failed to load the selected library '%1'. %2 Не удалось загрузить выбранную библиотеку '%1'. %2 - + File not found: '%1' - + Failed to load/setup addon %1: %2 - + Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located. Please note that --data-dir is supposed to be used by installation scripts and therefore the GUI does not start when it is used, all that happens is that the setting is configured. Analysis is aborted. - + Failed to load %1 - %2 Analysis is aborted. - - + + %1 Analysis is aborted. - + License Лицензия - + Authors Авторы - + Save the report file Сохранить файл с отчетом - - + + XML files (*.xml) XML-файлы (*.xml) - + There was a problem with loading the editor application settings. This is probably because the settings were changed between the Cppcheck versions. Please check (and fix) the editor application settings, otherwise the editor program might not start correctly. @@ -1101,37 +1101,37 @@ This is probably because the settings were changed between the Cppcheck versions Возможно, это связано с изменениями в версии программы. Пожалуйста, проверьте (и исправьте) настройки приложения. - + You must close the project file before selecting new files or directories! Вы должны закрыть проект перед выбором новых файлов или каталогов! - + The library '%1' contains unknown elements: %2 Библиотека '%1' содержит неизвестные элементы: %2 - + Duplicate platform type Дубликат типа платформы - + Platform type redefined Переобъявление типа платформы - + Unknown element Неизвестный элемент - - - - + + + + Error Ошибка @@ -1140,50 +1140,50 @@ This is probably because the settings were changed between the Cppcheck versions Невозможно загрузить %1. Cppcheck установлен некорректно. Вы можете использовать --data-dir=<directory> в командной строке для указания расположения файлов конфигурации. Обратите внимание, что --data-dir предназначен для использования сценариями установки. При включении данной опции, графический интерфейс пользователя не запускается. - + Open the report file Открыть файл с отчетом - + Text files (*.txt) Текстовые файлы (*.txt) - + CSV files (*.csv) CSV файлы(*.csv) - + Project files (*.cppcheck);;All files(*.*) Файлы проекта (*.cppcheck);;Все файлы(*.*) - + Select Project File Выберите файл проекта - - - - + + + + Project: Проект: - + No suitable files found to analyze! Не найдено подходящих файлов для анализа - + C/C++ Source Исходный код C/C++ - + Compile database @@ -1196,22 +1196,22 @@ This is probably because the settings were changed between the Cppcheck versions Borland C++ Builder 6 - + Select files to analyze Выбор файлов для анализа - + Select directory to analyze Выбор каталога для анализа - + Select the configuration that will be analyzed Выбор используемой конфигурации - + Found project files from the directory. Do you want to proceed analysis without using any of these project files? @@ -1220,7 +1220,7 @@ Do you want to proceed analysis without using any of these project files? - + Current results will be cleared. Opening a new XML file will clear current results. @@ -1231,7 +1231,7 @@ Do you want to proceed? Вы хотите продолжить? - + Analyzer is running. Do you want to stop the analysis and exit Cppcheck? @@ -1240,104 +1240,104 @@ Do you want to stop the analysis and exit Cppcheck? Вы хотите остановить анализ и выйти из Cppcheck? - + About - + XML files (*.xml);;Text files (*.txt);;CSV files (*.csv) XML файлы (*.xml);;Текстовые файлы (*.txt);;CSV файлы (*.csv) - + Build dir '%1' does not exist, create it? Директория для сборки '%1' не существует, создать? - + To check the project using addons, you need a build directory. - + Failed to open file - + Unknown project file format - + Failed to import project file - + Failed to import '%1': %2 Analysis is stopped. - + Failed to import '%1' (%2), analysis is stopped - + Show Mandatory - + Show Required - + Show Advisory - + Show Document - + Show L1 - + Show L2 - + Show L3 - + Show style - + Show portability - + Show performance - + Show information @@ -1346,22 +1346,22 @@ Analysis is stopped. Невозможно импортировать '%1', анализ остановлен - + Project files (*.cppcheck) Файлы проекта (*.cppcheck) - + Select Project Filename Выберите имя файла для проекта - + No project file loaded Файл с проектом не загружен - + The project file %1 @@ -1377,12 +1377,12 @@ Do you want to remove the file from the recently used projects -list? Хотите удалить его из списка проектов? - + Install - + New version available: %1. %2 @@ -1899,17 +1899,17 @@ Options: Файл проекта: %1 - + Select Cppcheck build dir Выбрать директорию сборки Cppcheck - + Select include directory Выберите директорию для поиска заголовочных файлов - + Select a directory to check Выберите директорию для проверки @@ -1928,7 +1928,7 @@ Options: Visual Studio - + Compile database @@ -1937,48 +1937,48 @@ Options: Borland C++ Builder 6 - + Import Project Импорт проекта - + C/C++ header - + Include file - + Select directory to ignore Выберите директорию, которую надо проигнорировать - + Source files - - + + All files - + Exclude file - + Select MISRA rule texts file Выбрать файл текстов правил MISRA - + MISRA rule texts file (%1) Файл текстов правил MISRA (%1) @@ -2479,42 +2479,42 @@ To toggle what kind of errors are shown, open view menu. Id - + Clear Log Очистить лог - + Copy this Log entry Скопировать данную запись - + Copy complete Log Скопировать полный лог - + Analysis was stopped - + There was a critical error with id '%1' - + when checking %1 - + when checking a file - + Analysis was aborted. diff --git a/gui/cppcheck_sr.ts b/gui/cppcheck_sr.ts index ebfe46f5ced..9579d88b695 100644 --- a/gui/cppcheck_sr.ts +++ b/gui/cppcheck_sr.ts @@ -548,14 +548,14 @@ Parameters: -l(line) (file) - + Show errors - + Show warnings @@ -571,8 +571,8 @@ Parameters: -l(line) (file) - - + + Information @@ -970,225 +970,225 @@ Parameters: -l(line) (file) &Help - - + + Quick Filter: - + Select configuration - + Found project file: %1 Do you want to load this project file instead? - + File not found - + Bad XML - + Missing attribute - + Bad attribute value - + Duplicate define - + Failed to load the selected library '%1'. %2 - + File not found: '%1' - + Failed to load/setup addon %1: %2 - + Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located. Please note that --data-dir is supposed to be used by installation scripts and therefore the GUI does not start when it is used, all that happens is that the setting is configured. Analysis is aborted. - + Failed to load %1 - %2 Analysis is aborted. - - + + %1 Analysis is aborted. - + License License - + Authors Authors - + Save the report file Save the report file - - + + XML files (*.xml) XML files (*.xml) - + There was a problem with loading the editor application settings. This is probably because the settings were changed between the Cppcheck versions. Please check (and fix) the editor application settings, otherwise the editor program might not start correctly. - + You must close the project file before selecting new files or directories! - + The library '%1' contains unknown elements: %2 - + Unsupported format - + Duplicate platform type - + Platform type redefined - + Unknown element - - - - + + + + Error - + Open the report file - + Text files (*.txt) Text files (*.txt) - + CSV files (*.csv) - + Project files (*.cppcheck);;All files(*.*) - + Select Project File - - - - + + + + Project: - + No suitable files found to analyze! - + C/C++ Source - + Compile database - + Select files to analyze - + Select directory to analyze - + Select the configuration that will be analyzed - + Found project files from the directory. Do you want to proceed analysis without using any of these project files? - + Current results will be cleared. Opening a new XML file will clear current results. @@ -1196,76 +1196,76 @@ Do you want to proceed? - + Analyzer is running. Do you want to stop the analysis and exit Cppcheck? - + About - + XML files (*.xml);;Text files (*.txt);;CSV files (*.csv) - + Build dir '%1' does not exist, create it? - + To check the project using addons, you need a build directory. - + Failed to open file - + Unknown project file format - + Failed to import project file - + Failed to import '%1': %2 Analysis is stopped. - + Failed to import '%1' (%2), analysis is stopped - + Project files (*.cppcheck) - + Select Project Filename - + No project file loaded - + The project file %1 @@ -1276,67 +1276,67 @@ Do you want to remove the file from the recently used projects -list? - + Install - + New version available: %1. %2 - + Show Mandatory - + Show Required - + Show Advisory - + Show Document - + Show L1 - + Show L2 - + Show L3 - + Show style - + Show portability - + Show performance - + Show information @@ -1836,17 +1836,17 @@ Options: - + Select Cppcheck build dir - + Select include directory - + Select a directory to check @@ -1861,53 +1861,53 @@ Options: - + Compile database - + Import Project - + C/C++ header - + Include file - + Select directory to ignore - + Source files - - + + All files - + Exclude file - + Select MISRA rule texts file - + MISRA rule texts file (%1) @@ -2380,42 +2380,42 @@ To toggle what kind of errors are shown, open view menu. - + Clear Log - + Copy this Log entry - + Copy complete Log - + Analysis was stopped - + There was a critical error with id '%1' - + when checking %1 - + when checking a file - + Analysis was aborted. diff --git a/gui/cppcheck_sv.ts b/gui/cppcheck_sv.ts index 43d6886afc0..79bc48d06fc 100644 --- a/gui/cppcheck_sv.ts +++ b/gui/cppcheck_sv.ts @@ -566,14 +566,14 @@ Exempel: - + Show errors Visa fel - + Show warnings Visa varningar @@ -589,8 +589,8 @@ Exempel: Visa dolda - - + + Information Information @@ -989,18 +989,18 @@ Exempel: &Hjälp - - + + Quick Filter: Snabbfilter: - + Select configuration Välj konfiguration - + Found project file: %1 Do you want to load this project file instead? @@ -1009,97 +1009,97 @@ Do you want to load this project file instead? Vill du ladda denna projektfil istället? - + File not found Filen hittades ej - + Bad XML Ogiltig XML - + Missing attribute Attribut finns ej - + Bad attribute value Ogiltigt attribut värde - + Unsupported format Format stöds ej - + Duplicate define - + Failed to load the selected library '%1'. %2 Misslyckades att ladda valda library '%1'. %2 - + File not found: '%1' - + Failed to load/setup addon %1: %2 - + Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located. Please note that --data-dir is supposed to be used by installation scripts and therefore the GUI does not start when it is used, all that happens is that the setting is configured. Analysis is aborted. - + Failed to load %1 - %2 Analysis is aborted. - - + + %1 Analysis is aborted. - + License Licens - + Authors Utvecklare - + Save the report file Spara rapport - - + + XML files (*.xml) XML filer (*.xml) - + There was a problem with loading the editor application settings. This is probably because the settings were changed between the Cppcheck versions. Please check (and fix) the editor application settings, otherwise the editor program might not start correctly. @@ -1108,37 +1108,37 @@ This is probably because the settings were changed between the Cppcheck versions En trolig orsak är att inställningarna ändrats för olika Cppcheck versioner. Kontrollera programinställningarna. - + You must close the project file before selecting new files or directories! Du måste stänga projektfilen innan nya filer eller sökvägar kan väljas! - + The library '%1' contains unknown elements: %2 Library filen '%1' har element som ej hanteras: %2 - + Duplicate platform type Dubbel plattformstyp - + Platform type redefined Plattformstyp definieras igen - + Unknown element Element hanteras ej - - - - + + + + Error Fel @@ -1147,50 +1147,50 @@ En trolig orsak är att inställningarna ändrats för olika Cppcheck versioner. Misslyckades att ladda %1. Din Cppcheck installation är ej komplett. Du kan använda --data-dir<directory> på kommandoraden för att specificera var denna fil finns. Det är meningen att --data-dir kommandot skall köras under installationen,så GUIt kommer ej visas när --data-dir används allt som händer är att en inställning görs. - + Open the report file Öppna rapportfilen - + Text files (*.txt) Text filer (*.txt) - + CSV files (*.csv) CSV filer (*.csv) - + Project files (*.cppcheck);;All files(*.*) Projektfiler (*.cppcheck);;Alla filer(*.*) - + Select Project File Välj projektfil - - - - + + + + Project: Projekt: - + No suitable files found to analyze! Inga filer hittades att analysera! - + C/C++ Source - + Compile database @@ -1199,22 +1199,22 @@ En trolig orsak är att inställningarna ändrats för olika Cppcheck versioner. Visual Studio - + Select files to analyze Välj filer att analysera - + Select directory to analyze Välj mapp att analysera - + Select the configuration that will be analyzed Välj konfiguration som kommer analyseras - + Found project files from the directory. Do you want to proceed analysis without using any of these project files? @@ -1223,7 +1223,7 @@ Do you want to proceed analysis without using any of these project files? - + Current results will be cleared. Opening a new XML file will clear current results. @@ -1231,7 +1231,7 @@ Do you want to proceed? - + Analyzer is running. Do you want to stop the analysis and exit Cppcheck? @@ -1240,104 +1240,104 @@ Do you want to stop the analysis and exit Cppcheck? Vill du stoppa analysen och avsluta Cppcheck? - + About - + XML files (*.xml);;Text files (*.txt);;CSV files (*.csv) XML filer (*.xml);;Text filer (*.txt);;CSV filer (*.csv) - + Build dir '%1' does not exist, create it? Build dir '%1' existerar ej, skapa den? - + To check the project using addons, you need a build directory. - + Failed to open file - + Unknown project file format - + Failed to import project file - + Failed to import '%1': %2 Analysis is stopped. - + Failed to import '%1' (%2), analysis is stopped - + Show Mandatory - + Show Required - + Show Advisory - + Show Document - + Show L1 - + Show L2 - + Show L3 - + Show style - + Show portability - + Show performance - + Show information @@ -1346,22 +1346,22 @@ Analysis is stopped. Misslyckades att importera '%1', analysen stoppas - + Project files (*.cppcheck) Projekt filer (*.cppcheck) - + Select Project Filename Välj Projektfil - + No project file loaded Inget projekt laddat - + The project file %1 @@ -1378,12 +1378,12 @@ Do you want to remove the file from the recently used projects -list? Vill du ta bort filen från 'senast använda projekt'-listan? - + Install - + New version available: %1. %2 @@ -1914,53 +1914,53 @@ Options: - + Select Cppcheck build dir Välj Cppcheck build dir - + C/C++ header - + Include file - + Select include directory Välj include sökväg - + Source files - - + + All files - + Exclude file - + Select MISRA rule texts file - + MISRA rule texts file (%1) - + Select a directory to check Välj mapp att analysera @@ -1969,17 +1969,17 @@ Options: Visual Studio - + Compile database - + Import Project Importera Projekt - + Select directory to ignore Välj sökväg att ignorera @@ -2483,42 +2483,42 @@ För att ställa in vilka fel som skall visas använd visa menyn. Id - + Clear Log - + Copy this Log entry - + Copy complete Log - + Analysis was stopped - + There was a critical error with id '%1' - + when checking %1 - + when checking a file - + Analysis was aborted. diff --git a/gui/cppcheck_zh_CN.ts b/gui/cppcheck_zh_CN.ts index 5ecaa17a91b..17a85231255 100644 --- a/gui/cppcheck_zh_CN.ts +++ b/gui/cppcheck_zh_CN.ts @@ -578,13 +578,13 @@ Parameters: -l(line) (file) - + Show errors 显示错误 - - + + Information 信息 @@ -691,7 +691,7 @@ Parameters: -l(line) (file) - + Show warnings 显示警告 @@ -989,7 +989,7 @@ Parameters: -l(line) (file) - + There was a problem with loading the editor application settings. This is probably because the settings were changed between the Cppcheck versions. Please check (and fix) the editor application settings, otherwise the editor program might not start correctly. @@ -998,23 +998,23 @@ This is probably because the settings were changed between the Cppcheck versions 这可能是因为 Cppcheck 不同版本间的设置有所不同。请检查(并修复)编辑器应用程序设置，否则编辑器程序可能不会正确启动。 - + You must close the project file before selecting new files or directories! 在选择新的文件或目录之前，你必须先关闭此项目文件！ - - + + Quick Filter: 快速滤器: - + Select configuration 选择配置 - + Found project file: %1 Do you want to load this project file instead? @@ -1023,64 +1023,64 @@ Do you want to load this project file instead? 你是否想加载该项目文件？ - + The library '%1' contains unknown elements: %2 库 '%1' 包含未知元素： %2 - + File not found 文件未找到 - + Bad XML 无效的 XML - + Missing attribute 缺失属性 - + Bad attribute value 无效的属性值 - + Unsupported format 不支持的格式 - + Duplicate platform type 重复的平台类型 - + Platform type redefined 平台类型重定义 - + Unknown element 位置元素 - + Failed to load the selected library '%1'. %2 选择的库 '%1' 加载失败。 %2 - - - - + + + + Error 错误 @@ -1089,108 +1089,108 @@ Do you want to load this project file instead? 加载 %1 失败。您的 Cppcheck 安装已损坏。您可以在命令行添加 --data-dir=<目录> 参数来指定文件位置。请注意，'--data-dir' 参数应当由安装脚本使用，因此，当使用此参数时，GUI不会启动，所发生的一切只是配置了设置。 - - + + XML files (*.xml) XML 文件(*.xml) - + Open the report file 打开报告文件 - + License 许可证 - + Authors 作者 - + Save the report file 保存报告文件 - + Text files (*.txt) 文本文件(*.txt) - + CSV files (*.csv) CSV 文件(*.csv) - + Project files (*.cppcheck);;All files(*.*) 项目文件(*.cppcheck);;所有文件(*.*) - + Select Project File 选择项目文件 - + Failed to open file - + Unknown project file format - + Failed to import project file - + Failed to import '%1': %2 Analysis is stopped. - + Failed to import '%1' (%2), analysis is stopped - + Install - + New version available: %1. %2 - - - - + + + + Project: 项目: - + No suitable files found to analyze! 没有找到合适的文件来分析! - + C/C++ Source C/C++ 源码 - + Compile database Compile database @@ -1203,22 +1203,22 @@ Analysis is stopped. Borland C++ Builder 6 - + Select files to analyze 选择要分析的文件 - + Select directory to analyze 选择要分析的目录 - + Select the configuration that will be analyzed 选择要分析的配置 - + Found project files from the directory. Do you want to proceed analysis without using any of these project files? @@ -1227,44 +1227,44 @@ Do you want to proceed analysis without using any of these project files? - + Duplicate define - + File not found: '%1' - + Failed to load/setup addon %1: %2 - + Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located. Please note that --data-dir is supposed to be used by installation scripts and therefore the GUI does not start when it is used, all that happens is that the setting is configured. Analysis is aborted. - + Failed to load %1 - %2 Analysis is aborted. - - + + %1 Analysis is aborted. - + Current results will be cleared. Opening a new XML file will clear current results. @@ -1275,7 +1275,7 @@ Do you want to proceed? 你想继续吗? - + Analyzer is running. Do you want to stop the analysis and exit Cppcheck? @@ -1284,77 +1284,77 @@ Do you want to stop the analysis and exit Cppcheck? 您想停止分析并退出 Cppcheck 吗？ - + About - + XML files (*.xml);;Text files (*.txt);;CSV files (*.csv) XML 文件 (*.xml);;文本文件 (*.txt);;CSV 文件 (*.csv) - + Build dir '%1' does not exist, create it? 构建文件夹 '%1' 不能存在，创建它吗？ - + To check the project using addons, you need a build directory. 要使用插件检查项目，您需要一个构建目录。 - + Show Mandatory - + Show Required - + Show Advisory - + Show Document - + Show L1 - + Show L2 - + Show L3 - + Show style - + Show portability - + Show performance - + Show information @@ -1363,22 +1363,22 @@ Do you want to stop the analysis and exit Cppcheck? 导入 '%1' 失败，分析已停止 - + Project files (*.cppcheck) 项目文件 (*.cppcheck) - + Select Project Filename 选择项目文件名 - + No project file loaded 项目文件未加载 - + The project file %1 @@ -1894,17 +1894,17 @@ Options: 项目文件: %1 - + Select Cppcheck build dir 选择 Cppcheck 构建目录 - + Select include directory 选择 Include 目录 - + Select a directory to check 选择一个检查目录 @@ -1923,7 +1923,7 @@ Options: Visual Studio - + Compile database Compile database @@ -1932,48 +1932,48 @@ Options: Borland C++ Builder 6 - + Import Project 导入项目 - + C/C++ header - + Include file - + Select directory to ignore 选择忽略的目录 - + Source files 源文件 - - + + All files 全部文件 - + Exclude file 排除文件 - + Select MISRA rule texts file 选择 MISRA 规则文本文件 - + MISRA rule texts file (%1) MISRA 规则文本文件 (%1) @@ -2505,42 +2505,42 @@ To toggle what kind of errors are shown, open view menu. 错误搜寻分析未完成 - + Clear Log 清空日志 - + Copy this Log entry 复制此日志条目 - + Copy complete Log 复制完整日志 - + Analysis was stopped - + There was a critical error with id '%1' - + when checking %1 - + when checking a file - + Analysis was aborted. diff --git a/gui/cppcheck_zh_TW.ts b/gui/cppcheck_zh_TW.ts index 3c25925c207..6be1247835e 100644 --- a/gui/cppcheck_zh_TW.ts +++ b/gui/cppcheck_zh_TW.ts @@ -618,7 +618,7 @@ Parameters: -l(line) (file) - + Show errors 顯示錯誤 @@ -746,7 +746,7 @@ Parameters: -l(line) (file) - + Show warnings 顯示警告 @@ -1003,43 +1003,43 @@ Options: Cppcheck GUI - 命令行參數 - - + + Quick Filter: 快速篩選: - - - - + + + + Project: 專案: - + There was a problem with loading the editor application settings. This is probably because the settings were changed between the Cppcheck versions. Please check (and fix) the editor application settings, otherwise the editor program might not start correctly. - + No suitable files found to analyze! 找不到適合的檔案來分析！ - + You must close the project file before selecting new files or directories! 您必須在選取新檔案或目錄之前關閉該專案檔！ - + C/C++ Source C/C++ 來源檔 - + Compile database 編譯資料庫 @@ -1052,145 +1052,145 @@ This is probably because the settings were changed between the Cppcheck versions Borland C++ Builder 6 - + Select files to analyze 選取要分析的檔案 - + Select directory to analyze 選取要分析的目錄 - + Select configuration 選取組態 - + Select the configuration that will be analyzed 選取要分析的組態 - + Found project file: %1 Do you want to load this project file instead? - + Found project files from the directory. Do you want to proceed analysis without using any of these project files? - - + + Information 資訊 - + The library '%1' contains unknown elements: %2 - + File not found 找不到檔案 - + Bad XML - + Missing attribute - + Bad attribute value - + Unsupported format 未支援的格式 - + Duplicate platform type 重複的平臺型別 - + Platform type redefined 平臺型別重定義 - + Duplicate define - + Unknown element 未知的元素 - + Failed to load the selected library '%1'. %2 無法載入選取的程式庫 '%1'。 %2 - + File not found: '%1' - + Failed to load/setup addon %1: %2 - - - - + + + + Error 錯誤 - + Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located. Please note that --data-dir is supposed to be used by installation scripts and therefore the GUI does not start when it is used, all that happens is that the setting is configured. Analysis is aborted. - + Failed to load %1 - %2 Analysis is aborted. - - + + %1 Analysis is aborted. - + Current results will be cleared. Opening a new XML file will clear current results. @@ -1198,18 +1198,18 @@ Do you want to proceed? - - + + XML files (*.xml) XML 檔案 (*.xml) - + Open the report file 開啟報告檔 - + Analyzer is running. Do you want to stop the analysis and exit Cppcheck? @@ -1218,77 +1218,77 @@ Do you want to stop the analysis and exit Cppcheck? 您想停止分析並離開 Cppcheck 嗎？ - + About 關於 - + License 授權 - + Authors 作者 - + XML files (*.xml);;Text files (*.txt);;CSV files (*.csv) XML 檔案 (*.xml);;文字檔 (*.txt);;CSV 檔案 (*.csv) - + Save the report file 儲存報告檔 - + Text files (*.txt) 文字檔 (*.txt) - + CSV files (*.csv) CSV 檔案 (*.csv) - + Project files (*.cppcheck);;All files(*.*) 專案檔 (*.cppcheck);;所有檔案 (*.*) - + Select Project File 選取專案檔 - + Build dir '%1' does not exist, create it? 建置目錄 '%1' 不存在，是否建立它？ - + To check the project using addons, you need a build directory. - + Failed to open file 無法開啟檔案 - + Unknown project file format 未知的專案檔格式 - + Failed to import project file 無法匯入專案檔 - + Failed to import '%1': %2 Analysis is stopped. @@ -1297,62 +1297,62 @@ Analysis is stopped. 停止分析。 - + Failed to import '%1' (%2), analysis is stopped - + Show Mandatory - + Show Required - + Show Advisory - + Show Document - + Show L1 - + Show L2 - + Show L3 - + Show style - + Show portability - + Show performance - + Show information @@ -1361,22 +1361,22 @@ Analysis is stopped. 無法匯入 '%1'，停止分析 - + Project files (*.cppcheck) 專案檔 (*.cppcheck) - + Select Project Filename 選取專案檔案名稱 - + No project file loaded - + The project file %1 @@ -1393,12 +1393,12 @@ Do you want to remove the file from the recently used projects -list? 您要從最近使用的專案列表中移除該檔案嗎？ - + Install 安章 - + New version available: %1. %2 可用的新版本: %1. %2 @@ -1886,7 +1886,7 @@ Do you want to remove the file from the recently used projects -list? Clang-tidy (找不到) - + Select Cppcheck build dir 選取 Cppcheck 建置目錄 @@ -1895,7 +1895,7 @@ Do you want to remove the file from the recently used projects -list? Visual Studio - + Compile database 編譯資料庫 @@ -1904,58 +1904,58 @@ Do you want to remove the file from the recently used projects -list? Borland C++ Builder 6 - + Import Project 匯入專案 - + C/C++ header - + Include file - + Select a directory to check 選取要檢查的目錄 - + Select include directory 選取包含目錄 - + Select directory to ignore 選取要忽略的目錄 - + Source files 來源檔 - - + + All files 所有檔案 - + Exclude file 排除檔案 - + Select MISRA rule texts file 選取 MISRA 規則文字檔 - + MISRA rule texts file (%1) MISRA 規則文字檔 (%1) @@ -2458,42 +2458,42 @@ To toggle what kind of errors are shown, open view menu. 識別號 - + Clear Log 清除日誌 - + Copy this Log entry 複製該日誌條目 - + Copy complete Log 複製完整的日誌 - + Analysis was stopped - + There was a critical error with id '%1' - + when checking %1 - + when checking a file - + Analysis was aborted.