[dependabot]

Updated WolverineFx from 6.57.0 to 6.58.0.

Release notes

Sourced from WolverineFx's releases.

6.58.0

New

• GH-5279 (#​5280, #​5282): New opt-in Durability.UseTransactionScopedDurabilityPassLock for PostgreSQL. The serverless durability pass takes a transaction-scoped advisory lock (pg_try_advisory_xact_lock) instead of a session lock. This makes the pass lock safe behind a transaction-mode pooler such as PgBouncer or Supabase's pooler, where a session lock can leak onto a pooled connection or be held by two passes at once. #​5282 hardens it:

  • the lock connection stays out of an ambient TransactionScope
  • an idle_in_transaction_session_timeout can no longer drop the lock in the middle of a pass
  • a lock transaction that ends before the pass does is reported, and its pooled connection is discarded
  • a session unlock that fails is logged as a warning

  Wolverine also logs a one-time warning when the store doesn't support the setting, or when extension steps such as Marten's projection catch-up run under the open lock transaction. That open transaction can stall Marten's gap detection, which is tracked in JasperFx/marten#​5791. See the serverless guide.

Fixes

• GH-5276 (#​5277, thanks @​3nth): The HTTP transport's batch endpoint now answers 503 when a durable local queue cannot write the batch to its inbox. Before, it answered 200 while the messages were dropped, so a durable outbox deleted messages that were never stored on either side. The sender now keeps the batch and retries it.
• GH-5278 (#​5281): A durable TCP listener now answers ProcessingFailure instead of Received when its inbox could not store a batch. The sender keeps the batch and retries it, and a late duplicate is deduplicated by id. gRPC listeners can't be durable, so they aren't affected. A guard test now pins that.
• #​5275 (thanks @​lahma): With Durability.EnableInboxPartitioning, PostgreSQL's durable inbox now refuses a redelivery whose identity was already handled. Before, the kept Handled row sat in a different partition and didn't collide, so the redelivery was handled a second time. This completes the stable-id deduplication from 6.57.0 for partitioned inboxes.

Commits viewable in compare view.

Updated WolverineFx.RuntimeCompilation from 6.55.1 to 6.58.0.

Release notes

Sourced from WolverineFx.RuntimeCompilation's releases.

6.58.0

New

• GH-5279 (#​5280, #​5282): New opt-in Durability.UseTransactionScopedDurabilityPassLock for PostgreSQL. The serverless durability pass takes a transaction-scoped advisory lock (pg_try_advisory_xact_lock) instead of a session lock. This makes the pass lock safe behind a transaction-mode pooler such as PgBouncer or Supabase's pooler, where a session lock can leak onto a pooled connection or be held by two passes at once. #​5282 hardens it:

  • the lock connection stays out of an ambient TransactionScope
  • an idle_in_transaction_session_timeout can no longer drop the lock in the middle of a pass
  • a lock transaction that ends before the pass does is reported, and its pooled connection is discarded
  • a session unlock that fails is logged as a warning

  Wolverine also logs a one-time warning when the store doesn't support the setting, or when extension steps such as Marten's projection catch-up run under the open lock transaction. That open transaction can stall Marten's gap detection, which is tracked in JasperFx/marten#​5791. See the serverless guide.

Fixes

• GH-5276 (#​5277, thanks @​3nth): The HTTP transport's batch endpoint now answers 503 when a durable local queue cannot write the batch to its inbox. Before, it answered 200 while the messages were dropped, so a durable outbox deleted messages that were never stored on either side. The sender now keeps the batch and retries it.
• GH-5278 (#​5281): A durable TCP listener now answers ProcessingFailure instead of Received when its inbox could not store a batch. The sender keeps the batch and retries it, and a late duplicate is deduplicated by id. gRPC listeners can't be durable, so they aren't affected. A guard test now pins that.
• #​5275 (thanks @​lahma): With Durability.EnableInboxPartitioning, PostgreSQL's durable inbox now refuses a redelivery whose identity was already handled. Before, the kept Handled row sat in a different partition and didn't collide, so the redelivery was handled a second time. This completes the stable-id deduplication from 6.57.0 for partitioned inboxes.

6.57.0

New

• GH-5244 (#​5272): NServiceBus interop now supports XML. Many NServiceBus systems still use the NServiceBus XmlSerializer, and they no longer have to switch to JSON before a migration to Wolverine can start. Every NServiceBus interop endpoint (Rabbit MQ, Azure Service Bus, Amazon SQS and SNS, and the SQL Server and PostgreSQL NServiceBus transports) now reads both JSON and XML, choosing per message from the NServiceBus.ContentType header. To send XML, use the new NServiceBusXmlSerializer: .UseNServiceBusInterop().DefaultSerializer(new NServiceBusXmlSerializer()). Because one endpoint reads both formats, NServiceBus endpoints can also move from XML to JSON gradually. See XML Serialization with NServiceBus.
• #​5268 (thanks @​lahma) and #​5273: A durable listener now gives a message from a non-Wolverine producer, which has no Wolverine id, a stable envelope id derived from the broker's own identity for that message. A redelivery is then deduplicated by the durable inbox instead of being handled twice. This covers Kafka (topic, partition and offset), NATS JetStream, Pulsar, Redis Streams, Amazon SQS and GCP Pub/Sub pull subscriptions. On SQS and Pub/Sub it applies in every endpoint mode. #​5273 also makes raw JSON work on durable SQS listeners. A duplicate the durable inbox refuses is now logged at Information instead of as an error.
• GH-5260 (#​5261): New opt-in WolverineHttpOptions.RejectUnparseableHeaderValues answers 400 with ProblemDetails when a [FromHeader] value can't be parsed.

Fixes

• GH-5244 (#​5272): NServiceBus replies to Wolverine over Rabbit MQ now go to the queue marked UseForReplies(). Wolverine used to give NServiceBus its own wolverine.response.{guid} system queue as the reply address, which NServiceBus can't reach, so every reply ended up in NServiceBus's error queue.
• GH-5247 (#​5248): DurabilityAgent.StopAsync() now cancels its in-flight durability command and waits for it to finish. Before, a command still running at shutdown could outlive the host and fail against a disposed data source.
• GH-5253 (#​5256, thanks @​thomhurst): A leadership lock acquisition cancelled by node shutdown is no longer logged as an error.
• GH-5254 (#​5265): Shutdown now waits for handlers still running on a buffered local queue.
• GH-5257 (#​5266): Stopping a listener now interrupts an inline retry cooldown instead of waiting it out, and the retry doesn't run after the stop.
• GH-5262 (#​5263): Lightweight EF Core handlers now collect domain events before their save, so the events are published atomically with it.
• #​5245 (thanks @​ahyousif): Managed EF Core tenancy combined with WithDbContextAbstraction now reuses the tenant DbContext, so repository writes, the save and outbox enrollment all use one context. This could previously fail code generation.
• #​5250 (thanks @​johnkaram02): A request that repeats a [FromHeader] header binds the comma-joined values instead of answering 500.
• #​5252 (thanks @​johnkaram02) and #​5259: Additional error actions such as AndPauseProcessing() chained after ScheduleRetryIndefinitely() / RequeueIndefinitely() now apply, including to the open-ended attempts after the listed delays.

Dependencies

• JasperFx 2.96.1 and JasperFx.RuntimeCompiler 5.0.1 (#​5258)
• Weasel 9.47.1 (#​5269)

Docs and build

• The Best Practices guide is rewritten (#​5270).
• New docs for stable envelope ids from non-Wolverine producers, and for deduplicating CloudEvents (#​5273).
• ./build.sh LocalGate runs every CI suite on one machine (GH-5125, #​5246). The CI suites are rebalanced to stay under the 20 minute job limit (#​5267), and the scaffold tests now pass on Windows (GH-5255, #​5264).

6.56.0

New

• GH-5238 (#​5242): opts.UseHttpTransport() registers the HTTP transport inside UseWolverine(). http/https URIs then resolve in ListenForMessagesFrom(), PublishMessage<T>().To(uri), and runtime EndpointFor() / ToDestination(). Before this, the transport was only registered by ToHttpEndpoint(), and any other http URI failed with Unknown Transport scheme 'http'. /_wolverine/invoke now answers 415 instead of 500 for a content type with no registered serializer.

Fixes

• GH-5235 (#​5239): Host shutdown now stops the durability metrics sweeper and waits for any query it has in flight before stores are disposed. Removing a durability agent also waits for its in-flight query. A metrics query could previously outlive IHost.StopAsync() and throw ObjectDisposedException against a disposed NpgsqlDataSource.
• GH-5236 (#​5240): A Kafka listener with a durable inbox no longer crashes the process with a stack overflow when the inbox database is unavailable. DeferAsync() used to call back into the receiver inline, so the failed inbox write and the defer recursed. A deferred Kafka envelope now goes back to the receiver on its own task after a short pause, and only while the listener is running. After a stop or inbox-recovery pause, its uncommitted offset brings it back. Because Kafka has no native requeue, a Requeue error policy on a Kafka endpoint now redelivers after about one second instead of immediately.
• GH-5237 (#​5241): A CloudEvents HTTP endpoint now fails a single-envelope send that the receiver rejects. It used to count the send as delivered, so a durable endpoint aimed at /_wolverine/invoke could delete an outgoing envelope that was never received. HTTP transport responses are now disposed.

Commits viewable in compare view.

[coderabbitai]

Important

Review skipped

Bot user detected.

To trigger a single review, invoke the @coderabbitai review command.

Run configuration

• Source mode: Auto
• Repository: NosCoreIO/NosCore
• Branch: master
• File: .coderabbit.yaml
• Commit: 16bc70e
• Layers: Repository YAML
• Review profile: CHILL
• Plan: Advanced
• Run ID: 629581d7-4a88-45d2-b33b-067c29d310bf

You can disable this status message by setting the reviews.review_status to false in the CodeRabbit configuration file.

Use the checkbox below for a quick retry:

• 🔍 Trigger review

• Autofix · Keep fixing CodeRabbit findings and required CI, and resolving merge conflicts

Thanks for using CodeRabbit! It's free for OSS, and your support helps us grow. If you like it, consider giving us a shout-out.

❤️ Share

• X
• Mastodon
• Reddit
• LinkedIn

_{Comment @coderabbitai help to get the list of available commands.}

[erwan-joly]

·@·d·ependabot r·ebase

---

Generated by Claude Code

[dependabot]

Looks like these dependencies are updatable in another way, so this is no longer needed.