[xji3]

What

On Ampere (GA10x, architecture 0x17) the NV boot now adds RMPcieLinkSpeed=0x800002AA to the registry table it hands GSP-RM, which locks the PCIe link at Gen1 at load. BEAGLE_NV_GA10X_LINK_LOCK=0 sends tinygrad's table instead. Ada and Blackwell are unchanged.

Why

On an RTX A6000 (GA102, 10de:2230) in an Aoostar AG03 (Intel JHL9480, Thunderbolt 5), GSP-RM 570.144 leaves the link at Gen1 x4 by GSP_INIT_DONE (target still Gen4; the card trains at Gen4 x4 cold). The link then dies under BAR1 traffic within seconds: the Mac's root port logs AER and "Link timeout ... Disabling the port", every read returns all ones, and the crash guard holds. The value is the one tinygrad PR #18215 found for Ada and Blackwell behind TB5 bridges. A Gen4 lock (0x80000295) broke the boot before INIT_DONE.

Changes

• TinyGPUNVBoot.h: nv_ga10x_link_lock(); the registry entry count is no longer hard-coded at 2.
• oracle/nv_init_helper.py: the same table on the goldens' tinygrad side.
• golden_boot.py: GA102 cases built from the A6000's own replies (early boot, NV_FLCN.init_sw on its VBIOS, the whole init_sw with and without the lock), compared with the card's L0 recording when the machine has it; a check that SET_REGISTRY carries the lock exactly on GA10x; three perturbations (the value, the gate, the opt-out). Cases whose captured VBIOS is not on the machine now print SKIPPED instead of crashing the test.
• TinyGPU.md: the Ampere row, the lock (it lasts until the enclosure is power-cycled), the opt-out, and that TinyGPU.app c0d024f9 serves only display-class (0x0300) cards.

Testing

On the RTX A6000 in the AG03:

• Without the lock: the link was lost on every cold boot tried (2 of 2).
• With it: the testing plan's NVIDIA matrix passed, about 80 boots in all with no failure and no hold:
  • cold and warm boots; SP and DP acceptance (200 repeats exact); SP and DP sweeps to 256 states;
  • instances, threads and cycles; both out-of-memory paths;
  • three soaks (64,000 / 20,000 / 5,000 reps) and 20 warm boots;
  • D1 SP 13/13 and DP 12/12;
  • kill-at-idle (guard verdict clean) and the P4 warm-GPU recovery.
• This PR's build, no env, after a power cycle: NV1 cold PASS on both usb2 and matrix_vector (logL -1498.89812 = CPU, clean teardown).
• Offline: golden_boot.py all identical on both branches (GA102 cases equal to the card's recording). run_goldens.sh fails only the goldens that need Docker or the author's private VBIOS and tables, the same set as before.

Notes

• Only one card and one enclosure have run this. Other GA10x boards and enclosures boot the same way but are untested. The cost of running at Gen1 is not measured: no unlocked boot of this card survives long enough to compare.
• The GA102 golden cases need the A6000's VBIOS and recording in ~/.beagle/tinygpu. Those are NVIDIA firmware and stay out of git, so on other machines these cases print SKIPPED.
• The same fix is open against both branches: a6000-fix → usb2 and mv-a6000-fix → matrix_vector. The matrix_vector cherry-pick resolved a conflict in golden_boot.py's main() in that branch's style.

🤖 Generated with Claude Code