Skip to content

remoteprocs(cdsp and lpaicp) failed to start on Shikra with 6.18-y #1155

Description

@vnarapar

remoteprocs(cdsp and lpaicp) failed to start on Shikra with 6.18-y

CR - 4684974

root@shikra-evk:/# cat /sys/class/remoteproc/remoteproc*/name
modem
cdsp
lpaicp
root@shikra-evk:/# cat /sys/class/remoteproc/remoteproc*/state
offline
offline
offline
root@shikra-evk:/#

[ 0.360463] qcom-ice 4748000.crypto: Found QC Inline Crypto Engine (ICE) v3.2.0
[ 0.360491] qcom-ice 4748000.crypto: QC Hardware Key Manager (HWKM) version v1
[ 0.360778] qcom-ice 4748000.crypto: Not using HWKM. Supporting raw keys only.
[ 0.360894] qcom-ice 4748000.crypto: ICE OPP table is not registered, please update your DT
[ 0.365691] qcom-pcie 45e8000.pcie: supply vdda not found, using dummy regulator
[ 0.366047] qcom-pcie 45e8000.pcie: supply vddpe-3v3 not found, using dummy regulator
[ 0.366527] qcom-pcie 45e8000.pcie: host bridge /soc@0/pcie@45e8000 ranges:
[ 0.366592] qcom-pcie 45e8000.pcie: IO 0x0060200000..0x00602fffff -> 0x0000000000
[ 0.366617] qcom-pcie 45e8000.pcie: MEM 0x0060300000..0x0063ffffff -> 0x0060300000
[ 0.366808] arm-smmu c600000.iommu: probing hardware configuration...
[ 0.366815] arm-smmu c600000.iommu: SMMUv2 with:
[ 0.366862] arm-smmu c600000.iommu: stage 1 translation
[ 0.366867] arm-smmu c600000.iommu: non-coherent table walk
[ 0.366871] arm-smmu c600000.iommu: (IDR0.CTTW overridden by FW configuration)
[ 0.366878] arm-smmu c600000.iommu: stream matching with 94 register groups
[ 0.366894] arm-smmu c600000.iommu: 42 context banks (0 stage-2 only)
[ 0.367375] arm-smmu c600000.iommu: Supported page sizes: 0x61311000
[ 0.367380] arm-smmu c600000.iommu: Stage-1: 36-bit VA -> 36-bit IPA
[ 0.367586] arm-smmu c600000.iommu: preserved 0 boot mappings
[ 0.369647] platform 1b04000.dma-controller: Adding to iommu group 0
[ 0.369883] platform 1b3a000.crypto: Adding to iommu group 0
[ 0.370084] platform 4744000.mmc: Adding to iommu group 1
[ 0.370239] platform 4784000.mmc: Adding to iommu group 2
[ 0.370389] platform 5c11000.camss: Adding to iommu group 3
[ 0.370603] platform 4a00000.dma-controller: Adding to iommu group 4
[ 0.370744] platform 4ac0000.geniqup: Adding to iommu group 5
[ 0.370899] platform 4e00000.usb: Adding to iommu group 6
[ 0.371402] platform 5d00000.ethernet: Adding to iommu group 7
[ 0.371604] platform 5e00000.display-subsystem: Adding to iommu group 8
[ 0.371823] platform 5a00000.video-codec: Adding to iommu group 9
[ 0.371994] platform c800000.wifi: Adding to iommu group 10
[ 0.375265] amba 8048000.tmc: Adding to iommu group 11
[ 0.395049] Freeing initrd memory: 9576K
[ 0.396406] sdhci_msm 4784000.mmc: Got CD GPIO
[ 0.403678] l4: unsupportable voltage range: 3000000-2960000uV
[ 0.408377] 4a80000.serial: ttyMSM0 at MMIO 0x4a80000 (irq = 109, base_baud = 0) is a MSM
[ 0.412927] printk: legacy console [ttyMSM0] enabled
[ 0.422469] mmc0: CQHCI version 5.10
[ 0.447656] irq: IRQ112: trimming hierarchy from :soc@0:interrupt-controller@f200000-1
[ 0.448056] 4aa0000.serial: ttyHS1 at MMIO 0x4aa0000 (irq = 111, base_baud = 0) is a MSM
[ 0.640682] serial serial0: tty port ttyHS1 registered
[ 0.652553] mmc1: SDHCI controller on 4784000.mmc [4784000.mmc] using ADMA 64-bit
[ 0.828440] qcom-pcie 45e8000.pcie: supply vdda not found, using dummy regulator
[ 0.848930] input: gpio-keys as /devices/platform/gpio-key/input/input0
[ 0.854432] qcom-pcie 45e8000.pcie: supply vddpe-3v3 not found, using dummy regulator
[ 0.862751] clk: Disabling unused clocks
[ 0.867509] qcom-pcie 45e8000.pcie: host bridge /soc@0/pcie@45e8000 ranges:
[ 0.870557] mmc0: SDHCI controller on 4744000.mmc [4744000.mmc] using ADMA 64-bit
[ 0.870574] sdhci_msm 4744000.mmc: mmc0: CQE init: success
[ 0.874357] PM: genpd: Disabling unused power domains
[ 0.880193] qcom-pcie 45e8000.pcie: IO 0x0060200000..0x00602fffff -> 0x0000000000
[ 0.926120] mmc0: Command Queue Engine enabled
[ 0.932675] qcom-pcie 45e8000.pcie: MEM 0x0060300000..0x0063ffffff -> 0x0060300000
[ 1.210260] qcom-pcie 45e8000.pcie: supply vdda not found, using dummy regulator
[ 1.213847] mmc0: new HS400 Enhanced strobe MMC card at address 0001
[ 1.215122] mmcblk0: mmc0:0001 TY2964 58.3 GiB
[ 1.218730] qcom-pcie 45e8000.pcie: supply vddpe-3v3 not found, using dummy regulator
[ 1.231602] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48 p49 p50 p51 p52 p53
[ 1.232192] qcom-pcie 45e8000.pcie: host bridge /soc@0/pcie@45e8000 ranges:
[ 1.245627] mmcblk0boot0: mmc0:0001 TY2964 4.00 MiB
[ 1.249804] qcom-pcie 45e8000.pcie: IO 0x0060200000..0x00602fffff -> 0x0000000000
[ 1.249820] qcom-pcie 45e8000.pcie: MEM 0x0060300000..0x0063ffffff -> 0x0060300000
[ 1.261110] mmcblk0boot0: p1
[ 4.862064] mmcblk0boot1: mmc0:0001 TY2964 4.00 MiB
[ 4.879967] Freeing unused kernel memory: 2560K
[ 4.882406] mmcblk0boot1: p1 p2
[ 4.885349] Run /init as init process
[ 4.889256] mmcblk0rpmb: mmc0:0001 TY2964 4.00 MiB, chardev (235:0)
[ 4.908821] qcom-pcie 45e8000.pcie: supply vdda not found, using dummy regulator
[ 4.916713] qcom-pcie 45e8000.pcie: supply vddpe-3v3 not found, using dummy regulator
[ 4.925023] qcom-pcie 45e8000.pcie: host bridge /soc@0/pcie@45e8000 ranges:
[ 4.932258] qcom-pcie 45e8000.pcie: IO 0x0060200000..0x00602fffff -> 0x0000000000
[ 4.940520] qcom-pcie 45e8000.pcie: MEM 0x0060300000..0x0063ffffff -> 0x0060300000
Starting systemd-udevd version 259.5
[ 6.841980] EXT4-fs (mmcblk0p53): mounted filesystem f7b11a99-ef39-47ac-96e8-5929297259fb r/w with ordered data mode. Quota mode: none.
[ 7.196794] systemd[1]: System time advanced to built-in epoch: Fri 2026-03-13 15:35:08 UTC
[ 7.692522] systemd[1]: systemd 259.5 running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA +IPE -SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID -CURL +ELFUTILS -FIDO2 -IDN2 -IDN +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE +TPM2 -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK -BTF +XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE)
[ 7.726629] systemd[1]: Detected architecture arm64.

Welcome to Qualcomm Linux Reference Distro 2.0!

[ 7.783301] systemd[1]: Initializing machine ID from random generator.
[ 7.802935] systemd[1]: Hostname set to .
[ 8.612796] systemd[1]: Queued start job for default target Graphical Interface.
[ 8.646909] systemd[1]: Created slice Slice /system/getty.
[ OK ] Created slice Slice /system/getty.
[ 8.666350] systemd[1]: Created slice Slice /system/modprobe.
[ OK ] Created slice Slice /system/modprobe.
[ 8.686332] systemd[1]: Created slice Slice /system/serial-getty.
[ OK ] Created slice Slice /system/serial-getty.
[ 8.705745] systemd[1]: Created slice Slice /urm.
[ OK ] Created slice Slice /urm.
[ 8.725182] systemd[1]: Created slice User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 8.744045] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Started Dispatch Password Requests to Console Directory Watch.
[ 8.764498] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ OK ] Started Forward Password Requests to Wall Directory Watch.
[ 8.788539] systemd[1]: Expecting device /dev/tee0...
Expecting device /dev/tee0...
[ 8.800142] systemd[1]: Expecting device /dev/ttyMSM0...
Expecting device /dev/ttyMSM0...
[ 8.812100] systemd[1]: Expecting device /dev/zram0...
Expecting device /dev/zram0...
[ 8.824142] systemd[1]: Reached target Local Encrypted Volumes.
[ OK ] Reached target Local Encrypted Volumes.
[ 8.844453] systemd[1]: Reached target Local Integrity Protected Volumes.
[ OK ] Reached target Local Integrity Protected Volumes.
[ 8.864272] systemd[1]: Reached target Path Units.
[ OK ] Reached target Path Units.
[ 8.876313] systemd[1]: Reached target Remote Encrypted Volumes.
[ OK ] Reached target Remote Encrypted Volumes.
[ 8.896422] systemd[1]: Reached target Remote File Systems.
[ OK ] Reached target Remote File Systems.
[ 8.909888] systemd[1]: Reached target Remote Integrity Protected Volumes.
[ OK ] Reached target Remote Integrity Protected Volumes.
[ 8.932453] systemd[1]: Reached target Remote Verity Protected Volumes.
[ OK ] Reached target Remote Verity Protected Volumes.
[ 8.952286] systemd[1]: Reached target Slice Units.
[ OK ] Reached target Slice Units.
[ 8.964410] systemd[1]: Reached target Local Verity Protected Volumes.
[ OK ] Reached target Local Verity Protected Volumes.
[ 8.984360] systemd[1]: Reached target libvirt guests shutdown target.
[ OK ] Reached target libvirt guests shutdown target.
[ 9.028778] systemd[1]: Listening on RPCbind Server Activation Socket.
[ OK ] Listening on RPCbind Server Activation Socket.
[ 9.048293] systemd[1]: Reached target RPC Port Mapper.
[ OK ] Reached target RPC Port Mapper.
[ 9.064808] systemd[1]: Listening on Syslog Socket.
[ OK ] Listening on Syslog Socket.
[ 9.096503] systemd[1]: Listening on Query the User Interactively for a Password.
[ OK ] Listening on Query the User Interactively for a Password.
[ 9.120576] systemd[1]: Listening on Process Core Dump Socket.
[ OK ] Listening on Process Core Dump Socket.
[ 9.143197] systemd[1]: Listening on Credential Encryption/Decryption.
[ OK ] Listening on Credential Encryption/Decryption.
[ 9.164769] systemd[1]: Listening on Factory Reset Management.
[ OK ] Listening on Factory Reset Management.
[ 9.184617] systemd[1]: Journal Audit Socket skipped, unmet condition check ConditionSecurity=audit
[ 9.194662] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 9.217122] systemd[1]: Listening on Journal Sockets.
[ OK ] Listening on Journal Sockets.
[ 9.246972] systemd[1]: Listening on Console Output Muting Service Socket.
[ OK ] Listening on Console Output Muting Service Socket.
[ 9.268037] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=tpm2
[ 9.277531] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=tpm2
[ 9.291472] systemd[1]: Listening on Disk Repartitioning Service Socket.
[ OK ] Listening on Disk Repartitioning Service Socket.
[ 9.312252] systemd[1]: Listening on Resolve Monitor Varlink Socket.
[ OK ] Listening on Resolve Monitor Varlink Socket.
[ 9.332702] systemd[1]: Listening on Resolve Service Varlink Socket.
[ OK ] Listening on Resolve Service Varlink Socket.
[ 9.352494] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 9.365289] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 9.378909] systemd[1]: Listening on udev Varlink Socket.
[ OK ] Listening on udev Varlink Socket.
[ 9.396179] systemd[1]: Listening on User Database Manager Socket.
[ OK ] Listening on User Database Manager Socket.
[ 9.435126] systemd[1]: Mounting Huge Pages File System...
Mounting Huge Pages File System...
[ 9.454066] systemd[1]: Mounting POSIX Message Queue File System...
Mounting POSIX Message Queue File System...
[ 9.477517] systemd[1]: Mounting Kernel Debug File System...
Mounting Kernel Debug File System...
[ 9.496543] systemd[1]: Mounting Kernel Trace File System...
Mounting Kernel Trace File System...
[ 9.529879] systemd[1]: Starting Create List of Static Device Nodes...
Starting Create List of Static Device Nodes...
[ 9.548306] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs
[ 9.565728] systemd[1]: Mounting Kernel Configuration File System...
Mounting Kernel Configuration File System...
[ 9.588193] systemd[1]: Starting Load Kernel Module drm...
Starting Load Kernel Module drm...
[ 9.600081] systemd[1]: Starting Load Kernel Module fuse...
Starting Load Kernel Module fuse...
[ 9.620126] systemd[1]: Clear SysFail Entry If The Boot Is Successful skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/LoaderEntrySysFail-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f
[ 9.638965] systemd[1]: File System Check on Root Device skipped, unmet condition check ConditionPathIsReadWrite=!/
[ 9.639108] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67
[ 9.670917] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ 9.703376] systemd[1]: Starting Load Kernel Modules...
[ 9.707643] fuse: init (API version 7.45)
Starting Load Kernel Modules...
[ 9.732138] systemd[1]: Starting Generate Network Units from Kernel Command Line...
Starting Generate Network Units from Kernel Co[ 9.741023] systemd[1]: TPM PCR Machine ID Measurement skipped, unmet condition check ConditionSecurity=tpm2
mmand Line...
[ 9.757211] systemd[1]: TPM NvPCR Product ID Measurement skipped, unmet condition check ConditionSecurity=tpm2
[ 9.777281] systemd-journald[298]: Collecting audit messages is disabled.
[ 9.779918] systemd[1]: Starting Remount Root and Kernel File Systems...
Starting Remount Root and Kernel File Systems...
[ 9.800675] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=tpm2
[ 9.821850] systemd[1]: Starting Load udev Rules from Credentials...
Starting Load udev Rules from Credentials...
[ 9.860386] systemd[1]: Starting Coldplug All udev Devices...
Starting Coldplug All udev Devices...
[ 9.887335] EXT4-fs (mmcblk0p53): re-mounted f7b11a99-ef39-47ac-96e8-5929297259fb.
[ 9.892980] systemd[1]: Starting Create compressed swap in memory using zram...
Starting Create compressed swap in memory using zram...
[ 9.927264] systemd[1]: Started Journal Service.
[ OK ] Started Journal Service.
[ OK ] Mounted Huge Pages File System.
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Mounted Kernel Debug File System.
[ OK ] Mounted Kernel Trace File System.
[ OK ] Finished Create List of Static Device Nodes.
[ OK ] Mounted Kernel Configuration File System.
[ OK ] Finished Load Kernel Module drm.
[ 10.041036] zram0: detected capacity change from 0 to 7326000
[ OK ] Finished Load Kernel Module fuse.
[ OK ] Finished Load Kernel Modules.
[ OK ] Finished Generate Network Units from Kernel Command Line.
[ OK ] Finished Remount Root and Kernel File Systems.
[ OK ] Finished Load udev Rules from Credentials.
[ OK ] Finished Create compressed swap in memory using zram.
Mounting FUSE Control File System...
Starting Flush Journal to Persistent Storage...
Starting Apply Kernel Variables...
Starting Create Static Device Nodes in /dev gracefully...
[ OK ] Mounted FUSE Control File System.
[ 10.293174] systemd-journald[298]: Received client request to flush runtime journal.
[ OK ] Finished Flush Journal to Persistent Storage.
[ OK ] Finished Apply Kernel Variables.
[ OK ] Finished Create Static Device Nodes in /dev gracefully.
Starting Create System Users...
Starting User Database Manager...
[ OK ] Started User Database Manager.
[ OK ] Finished Coldplug All udev Devices.
[ OK ] Finished Create System Users.
Starting Network Name Resolution...
Starting Network Time Synchronization...
Starting Create Static Device Nodes in /dev...
[ OK ] Finished Create Static Device Nodes in /dev.
[ OK ] Reached target Preparation for Local File Systems.
[ OK ] Set up automount EFI System Partition Automount.
Starting Grow Root File System...
Starting Rule-based Manager for Device Events and Files...
[ OK ] Started Network Time Synchronization.
[ OK ] Reached target System Time Set.
[ 11.005000] EXT4-fs (mmcblk0p53): resizing filesystem from 977920 to 15076427 blocks
[ OK ] Started Network Name Resolution.
[ OK ] Reached target Host and Network Name Lookups.
[ OK ] Started Rule-based Manager for Device Events and Files.
[ 12.893997] EXT4-fs (mmcblk0p53): resized filesystem to 15076427
[ OK ] Found device /dev/zram0.
[ OK ] Found device /dev/ttyMSM0.
[ OK ] Finished Grow Root File System.
[ 15.010268] qcom-pcie 45e8000.pcie: supply vdda not found, using dummy regulator
[ 15.010666] /soc@0/spmi@1c40000/pmic@0/typec@1500/connector: Fixed dependency cycle(s) with /soc@0/phy@1615000
[ 15.099969] qcom-pcie 45e8000.pcie: supply vddpe-3v3 not found, using dummy regulator
[ 15.133061] qcom-pcie 45e8000.pcie: host bridge /soc@0/pcie@45e8000 ranges:
[ 15.140527] qcom-pcie 45e8000.pcie: IO 0x0060200000..0x00602fffff -> 0x0000000000
[ 15.149017] qcom-pcie 45e8000.pcie: MEM 0x0060300000..0x0063ffffff -> 0x0060300000
[ 15.231012] qcom-pcie 45e8000.pcie: supply vdda not found, using dummy regulator
[ 15.231235] geni_i2c 4a8c000.i2c: Bus frequency not specified, default to 100kHz.
[ 15.239051] qcom-pcie 45e8000.pcie: supply vddpe-3v3 not found, using dummy regulator
[ 15.341047] qcom-pcie 45e8000.pcie: host bridge /soc@0/pcie@45e8000 ranges:
[ 15.349725] qcom-pcie 45e8000.pcie: IO 0x0060200000..0x00602fffff -> 0x0000000000
[ 15.358917] qcom-pcie 45e8000.pcie: MEM 0x0060300000..0x0063ffffff -> 0x0060300000
[ 15.395048] usb_vbus: Operation of current configuration missing
[ 15.414209] rtc-pm8xxx 1c40000.spmi:pmic@0:rtc@6000: registered as rtc0
[ 15.421692] rtc-pm8xxx 1c40000.spmi:pmic@0:rtc@6000: setting system clock to 1970-01-01T00:19:30 UTC (1170)
[ 15.423033] /soc@0/camss@5c11000: Fixed dependency cycle(s) with /soc@0/cci@5c1b000/i2c-bus@1/camera@1a
[ 15.447969] mc: Linux media interface: v0.10
[ 15.454938] systemd-journald[298]: Time jumped backwards, rotating.
[ 15.456214] /soc@0/cci@5c1b000/i2c-bus@1/camera@1a: Fixed dependency cycle(s) with /soc@0/camss@5c11000
[ 15.498730] arm-smmu 59a0000.iommu: probing hardware configuration...
[ 15.505682] arm-smmu 59a0000.iommu: SMMUv2 with:
[ 15.510613] arm-smmu 59a0000.iommu: stage 1 translation
[ 15.510959] input: pm8941_pwrkey as /devices/platform/soc@0/1c40000.spmi/spmi-0/0-00/1c40000.spmi:pmic@0:pon@800/1c40000.spmi:pmic@0:pon@800:pwrkey/input/input1
[ 15.516114] arm-smmu 59a0000.iommu: non-coherent table walk
[ 15.516118] arm-smmu 59a0000.iommu: (IDR0.CTTW overridden by FW configuration)
[ 15.516123] arm-smmu 59a0000.iommu: stream matching with 7 register groups
[ 15.516140] arm-smmu 59a0000.iommu: 5 context banks (0 stage-2 only)
[ 15.516157] arm-smmu 59a0000.iommu: Supported page sizes: 0x61311000
[ 15.516161] arm-smmu 59a0000.iommu: Stage-1: 48-bit VA -> 36-bit IPA
[ 15.516299] arm-smmu 59a0000.iommu: preserved 0 boot mappings
[ 15.587350] platform 5900000.gpu: Adding to iommu group 12
[ 15.587430] input: pm8941_resin as /devices/platform/soc@0/1c40000.spmi/spmi-0/0-00/1c40000.spmi:pmic@0:pon@800/1c40000.spmi:pmic@0:pon@800:resin/input/input2
[ 15.589101] videodev: Linux video capture interface: v2.00
[ 15.652160] qcom-pcie 45e8000.pcie: supply vdda not found, using dummy regulator
[ 15.661170] qcom-pcie 45e8000.pcie: supply vddpe-3v3 not found, using dummy regulator
[ 15.670046] qcom-pcie 45e8000.pcie: host bridge /soc@0/pcie@45e8000 ranges:
[ 15.677466] qcom-pcie 45e8000.pcie: IO 0x0060200000..0x00602fffff -> 0x0000000000
[ 15.687709] qcom-pcie 45e8000.pcie: MEM 0x0060300000..0x0063ffffff -> 0x0060300000
[ 15.729804] cs_system_cfg: CoreSight Configuration manager initialised
[ 15.747374] coresight-etm4x etm0: probe with driver coresight-etm4x failed with error -22
[ 15.757525] coresight-etm4x etm1: probe with driver coresight-etm4x failed with error -22
[ 15.767845] coresight-etm4x etm2: probe with driver coresight-etm4x failed with error -22
[ 15.778357] coresight-etm4x etm3: probe with driver coresight-etm4x failed with error -22
[ 15.851429] qcom-pcie 45e8000.pcie: iATU: unroll T, 8 ob, 8 ib, align 4K, limit 1024G
[ 15.955905] qcom-pcie 45e8000.pcie: PCIe Gen.2 x1 link up
[ 15.962571] qcom-pcie 45e8000.pcie: PCI host bridge to bus 0000:00
[ 15.969090] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 15.974902] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff]
[ 15.981473] pci_bus 0000:00: root bus resource [mem 0x60300000-0x63ffffff]
[ 15.988901] pci 0000:00:00.0: [17cb:012d] type 01 class 0x060400 PCIe Root Port
[ 15.996552] pci 0000:00:00.0: BAR 0 [mem 0x00000000-0x00000fff]
[ 16.002800] pci 0000:00:00.0: BAR 1 [mem 0x00000000-0x0000ffff]
[ 16.009040] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 16.014526] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff]
[ 16.020943] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff]
[ 16.028054] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 16.036214] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 16.043140] OF: /soc@0/pcie@45e8000: iommu-map mismatches target #iommu-cells, assuming extra cell of 0
[ 16.053503] pci 0000:00:00.0: Adding to iommu group 13
[ 16.065482] pci 0000:01:00.0: [1179:0623] type 01 class 0x060400 PCIe Switch Upstream Port
[ 16.074220] pci 0000:01:00.0: PCI bridge to [bus 00]
[ 16.079409] pci 0000:01:00.0: bridge window [io 0x0000-0x0fff]
[ 16.085723] pci 0000:01:00.0: bridge window [mem 0x00000000-0x000fffff]
[ 16.092783] pci 0000:01:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 16.101395] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 16.108199] pci 0000:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0000:00:00.0 (capable of 15.752 Gb/s with 8.0 GT/s PCIe x2 link)
[ 16.124362] pci 0000:01:00.0: Adding to iommu group 13
[ 16.136226] pci 0000:01:00.0: ASPM: default states L0s L1
[ 16.142104] pci 0000:01:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 16.152516] pci 0000:02:01.0: [1179:0623] type 01 class 0x060400 PCIe Switch Downstream Port
[ 16.161516] pci 0000:02:01.0: PCI bridge to [bus 00]
[ 16.166767] pci 0000:02:01.0: bridge window [io 0x0000-0x0fff]
[ 16.173197] pci 0000:02:01.0: bridge window [mem 0x00000000-0x000fffff]
[ 16.180385] pci 0000:02:01.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
Activating swap Enable compressed swap in memo[ 16.189338] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
ry using zram...
[ 16.202294] pci 0000:02:01.0: Adding to iommu group 13
[ 16.208958] pci 0000:02:02.0: [1179:0623] type 01 class 0x060400 PCIe Switch Downstream Port
[ 16.217916] pci 0000:02:02.0: PCI bridge to [bus 00]
[ 16.223113] pci 0000:02:02.0: bridge window [io 0x0000-0x0fff]
Starting Create ext4 filesystem on persist par[ 16.229445] pci 0000:02:02.0: bridge window [mem 0x00000000-0x000fffff]
[ 16.242591] pci 0000:02:02.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]

[ 16.243166] pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
[ 16.261079] pci 0000:02:02.0: Adding to iommu group 13
[ 16.269252] Adding 3662996k swap on /dev/zram0. Priority:-2 extents:1 across:3662996k SS
[ 16.269753] pci 0000:02:03.0: [1179:0623] type 01 class 0x060400 PCIe Switch Downstream Port
[ 16.286685] pci 0000:02:03.0: PCI bridge to [bus 00]
[ 16.291894] pci 0000:02:03.0: bridge window [io 0x0000-0x0fff]
[ 16.291916] pci 0000:02:03.0: bridge window [mem 0x00000000-0x000fffff]
[ 16.291988] pci 0000:02:03.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 16.292553] pci 0000:02:03.0: PME# supported from D0 D3hot D3cold
[ OK ] Activated swap Enable compressed sw[ 16.321087] pci 0000:02:03.0: Adding to iommu group 13
ap in memory using zram.
[ 16.336417] pci 0000:02:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 16.344778] pci 0000:02:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 16.353082] pci 0000:02:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ OK ] Reached target Swaps.
[ 16.362172] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03
[ 16.374172] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 04
[ 16.381592] pci 0000:05:00.0: [1179:0220] type 00 class 0x020000 PCIe Endpoint
[ 16.389392] pci 0000:05:00.0: BAR 0 [mem 0x00000000-0x00003fff 64bit]
[ 16.396079] pci 0000:05:00.0: BAR 2 [mem 0x00000000-0x0007ffff 64bit]
[ 16.402742] pci 0000:05:00.0: BAR 4 [mem 0x00000000-0x001fffff 64bit]
[ 16.410042] pci 0000:05:00.0: supports D1
[ 16.414197] pci 0000:05:00.0: PME# supported from D0 D1 D3hot D3cold
[ 16.421202] pci 0000:05:00.0: VF BAR 0 [mem 0x00000000-0x00003fff 64bit]
[ 16.428117] pci 0000:05:00.0: VF BAR 0 [mem 0x00000000-0x0000bfff 64bit]: contains BAR 0 for 3 VFs
[ 16.437376] pci 0000:05:00.0: VF BAR 2 [mem 0x00000000-0x0007ffff 64bit]
[ 16.437381] pci 0000:05:00.0: VF BAR 2 [mem 0x00000000-0x0017ffff 64bit]: contains BAR 2 for 3 VFs
[ 16.437401] pci 0000:05:00.0: VF BAR 4 [mem 0x00000000-0x001fffff 64bit]
[ 16.437404] pci 0000:05:00.0: VF BAR 4 [mem 0x00000000-0x005fffff 64bit]: contains BAR 4 for 3 VFs
[ 16.438069] pci 0000:05:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0000:00:00.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[ 16.439820] pci 0000:05:00.0: Adding to iommu group 13
Mounting Temporary Directory /tmp...
[ 16.491615] pci 0000:05:00.1: [1179:0220] type 00 class 0x020000 PCIe Endpoint
[ 16.504354] pci 0000:05:00.1: BAR 0 [mem 0x00000000-0x00003fff 64bit]
[ 16.511029] pci 0000:05:00.1: BAR 2 [mem 0x00000000-0x0007ffff 64bit]
[ 16.517715] pci 0000:05:00.1: BAR 4 [mem 0x00000000-0x001fffff 64bit]
[ 16.525017] pci 0000:05:00.1: supports D1
[ 16.529165] pci 0000:05:00.1: PME# supported from D0 D1 D3hot D3cold
[ 16.536089] pci 0000:05:00.1: VF BAR 0 [mem 0x00000000-0x00003fff 64bit]
[ 16.543022] pci 0000:05:00.1: VF BAR 0 [mem 0x00000000-0x0000bfff 64bit]: contains BAR 0 for 3 VFs
[ 16.543044] pci 0000:05:00.1: VF BAR 2 [mem 0x00000000-0x0007ffff 64bit]
[ 16.543047] pci 0000:05:00.1: VF BAR 2 [mem 0x00000000-0x0017ffff 64bit]: contains BAR 2 for 3 VFs
[ 16.543067] pci 0000:05:00.1: VF BAR 4 [mem 0x00000000-0x001fffff 64bit]
[ 16.543071] pci 0000:05:00.1: VF BAR 4 [mem 0x00000000-0x005fffff 64bit]: contains BAR 4 for 3 VFs
[ 16.545065] pci 0000:05:00.1: Adding to iommu group 13
[ 16.590663] pci 0000:05:00.0: ASPM: default states L0s L1
[ 16.596624] pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to 05
[ 16.603508] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 05
[ 16.610407] pci 0000:02:03.0: bridge window [mem 0x00100000-0x006fffff] to [bus 05] add_size f00000 add_align 200000
[ 16.621251] pci 0000:01:00.0: bridge window [mem 0x00100000-0x006fffff] to [bus 02-05] add_size f00000 add_align 200000
[ 16.632356] pci 0000:00:00.0: bridge window [mem 0x00100000-0x006fffff] to [bus 01-ff] add_size f00000 add_align 200000
[ 16.632379] pci 0000:00:00.0: bridge window [mem 0x60400000-0x618fffff]: assigned
[ 16.632385] pci 0000:00:00.0: BAR 1 [mem 0x60300000-0x6030ffff]: assigned
[ 16.632393] pci 0000:00:00.0: BAR 0 [mem 0x60310000-0x60310fff]: assigned
[ 16.632402] pci 0000:01:00.0: bridge window [mem 0x60400000-0x618fffff]: assigned
[ 16.632409] pci 0000:02:03.0: bridge window [mem 0x60400000-0x618fffff]: assigned
[ 16.632414] pci 0000:02:01.0: PCI bridge to [bus 03]
[ 16.632500] pci 0000:02:02.0: PCI bridge to [bus 04]
[ 16.632595] pci 0000:05:00.0: BAR 4 [mem 0x60400000-0x605fffff 64bit]: assigned

[ 16.632659] pci 0000:05:00.0: VF BAR 4 [mem 0x60600000-0x60bfffff 64bit]: assigned
[ 16.632688] pci 0000:05:00.1: BAR 4 [mem 0x60c00000-0x60dfffff 64bit]: assigned
[ 16.718694] pci 0000:05:00.1: VF BAR 4 [mem 0x60e00000-0x613fffff 64bit]: assigned
[ 16.718725] pci 0000:05:00.0: BAR 2 [mem 0x61400000-0x6147ffff 64bit]: assigned
[ 16.718865] pci 0000:05:00.0: VF BAR 2 [mem 0x61480000-0x615fffff 64bit]: assigned
[ 16.742003] pci 0000:05:00.1: BAR 2 [mem 0x61600000-0x6167ffff 64bit]: assigned
[ 16.749613] pci 0000:05:00.1: VF BAR 2 [mem 0x61680000-0x617fffff 64bit]: assigned
[ 16.757456] pci 0000:05:00.0: BAR 0 [mem 0x61800000-0x61803fff 64bit]: assigned
[ 16.765055] pci 0000:05:00.0: VF BAR 0 [mem 0x61804000-0x6180ffff 64bit]: assigned
[ 16.772900] pci 0000:05:00.1: BAR 0 [mem 0x61810000-0x61813fff 64bit]: assigned
[ 16.780499] pci 0000:05:00.1: VF BAR 0 [mem 0x61814000-0x6181ffff 64bit]: assigned
[ 16.788361] pci 0000:02:03.0: PCI bridge to [bus 05]
[ 16.788390] pci 0000:02:03.0: bridge window [mem 0x60400000-0x618fffff]
[ 16.788447] pci 0000:01:00.0: PCI bridge to [bus 02-05]
[ 16.788475] pci 0000:01:00.0: bridge window [mem 0x60400000-0x618fffff]
[ 16.788526] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 16.788533] pci 0000:00:00.0: bridge window [mem 0x60400000-0x618fffff]
[ 16.788545] pci_bus 0000:00: resource 4 [io 0x0000-0xfffff]
[ 16.788550] pci_bus 0000:00: resource 5 [mem 0x60300000-0x63ffffff]
[ 16.788554] pci_bus 0000:01: resource 1 [mem 0x60400000-0x618fffff]
[ 16.788558] pci_bus 0000:02: resource 1 [mem 0x60400000-0x618fffff]
[ 16.788563] pci_bus 0000:05: resource 1 [mem 0x60400000-0x618fffff]
[ 16.789214] pcieport 0000:00:00.0: PME: Signaling with IRQ 159
[ OK ] Finished Create ext4 filesystem on [ 16.866238] pcieport 0000:00:00.0: AER: enabled with IRQ 159
persist partition if missing.
[ 16.877798] pcieport 0000:01:00.0: enabling device (0000 -> 0002)
[ 16.892616] pcieport 0000:02:03.0: enabling device (0000 -> 0002)
[ OK ] Mounted Temporary Directory /tmp.
[ OK ] Mounted /var/volatile.
Mounting Mount persist partition at /var/lib/tee...
Starting Load/Save OS Random Seed...
[ 18.731252] coresight cti_sys0: CTI initialized 0
[ 18.761982] EXT4-fs (mmcblk0p51): mounted filesystem 1f080ed4-98b0-473c-9004-5c71e9483488 r/w with ordered data mode. Quota mode: none.
[ 18.762891] coresight cti_sys1: CTI initialized 0
[ 18.789335] coresight stm0: STM32 initialized
[ 18.805822] coresight cti_sys2: CTI initialized 0/tee.

[ OK ] Finished Load/Save OS Random Seed.
[ OK ] Reached target Local File Systems 18.841054] coresight cti_sys3: CTI initialized 0
0m.
[ 18.845255] Bluetooth: Core ver 2.22
[ 18.853774] NET: Registered PF_BLUETOOTH protocol family
[ 18.859397] Bluetooth: HCI device and connection manager initialized
[ 18.859425] Bluetooth: HCI socket layer initialized
[ 18.859434] Bluetooth: L2CAP socket layer initialized
[ 18.859483] Bluetooth: SCO socket layer initialized
[ OK ] Listening on Boot Entries Service S[ 18.860190] coresight cti_sys4: CTI initialized 0
ocket.
[ 18.861510] qcom-ethqos 5d00000.ethernet: IRQ eth_wake_irq not found
[ 18.861523] qcom-ethqos 5d00000.ethernet: IRQ sfty not found
[ 18.877999] Bluetooth: HCI UART driver ver 2.3
[ 18.910986] Bluetooth: HCI UART protocol H4 registered
[ 18.911642] qcom-ethqos 5d00000.ethernet: User ID: 0x51, Synopsys ID: 0x54
[ 18.912000] coresight cti_sys5: CTI initialized 0
[ 18.912396] coresight cti_sys6: CTI initialized 0
[ 18.913463] coresight cti_sys7: CTI initialized 0
[ 18.916559] Bluetooth: HCI UART protocol LL registered
[ 18.923500] qcom-ethqos 5d00000.ethernet: DWMAC4/5
[ 18.923568] qcom-ethqos 5d00000.ethernet: DMA HW capability register supported
[ 18.928694] Bluetooth: HCI UART protocol QCA registered
[ 18.931438] coresight cti_sys8: CTI initialized 0
[ 18.933498] qcom-ethqos 5d00000.ethernet: RX Checksum Offload Engine supported
[ 18.933515] qcom-ethqos 5d00000.ethernet: TX Checksum insertion supported
[ 18.933519] qcom-ethqos 5d00000.ethernet: TSO supported
[ 18.933524] qcom-ethqos 5d00000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 18.933542] qcom-ethqos 5d00000.ethernet: device MAC address 3e:7f:bb:88:a8:b2
[ 18.933553] qcom-ethqos 5d00000.ethernet: Enabled L3L4 Flow TC (entries=8)
[ 18.949331] coresight cti_sys9: CTI initialized 0
[ 18.956389] qcom-ethqos 5d00000.ethernet: Enabled RFS Flow TC (entries=10)
[ 18.964115] coresight cti_sys10: CTI initialized 0
[ 18.968058] qcom-ethqos 5d00000.ethernet: Enabling HW TC (entries=64, max_off=64)
[ 18.982368] coresight cti_sys11: CTI initialized 0
[ 18.998542] qcom-ethqos 5d00000.ethernet: TSO feature enabled
[ 19.015792] /soc@0/display-subsystem@5e00000/display-controller@5e01000: Fixed dependency cycle(s) with /soc@0/display-subsystem@5e00000/dsi@5e94000
[ 19.026233] qcom-ethqos 5d00000.ethernet: SPH feature enabled
[ 19.043883] coresight cti_sys12: CTI initialized 0
[ 19.045722] qcom-ethqos 5d00000.ethernet: Using 36/40 bits DMA host/device width
[ 19.070187] coresight cti_sys13: CTI initialized 0
[ 19.079814] NET: Registered PF_QIPCRTR protocol family
Starting Update Boot Loader Random Seed...
[ 19.094742] coresight cti_sys14: CTI initialized 0
[ 19.095250] /soc@0/display-subsystem@5e00000/display-controller@5e01000: Fixed dependency cycle(s) with /soc@0/display-subsystem@5e00000/dsi@5e94000
[ 19.099728] remoteproc remoteproc0: modem is available
Starting Automatic Boot Loader Update...
[ 19.132647] /soc@0/display-subsystem@5e00000/dsi@5e94000: Fixed dependency cycle(s) with /soc@0/display-subsystem@5e00000/dsi@5e94000/panel@0
[ 19.151895] /soc@0/display-subsystem@5e00000/dsi@5e94000: Fixed dependency cycle(s) with /soc@0/display-subsystem@5e00000/display-controller@5e01000
[ 19.167239] /soc@0/display-subsystem@5e00000/dsi@5e94000/panel@0: Fixed dependency cycle(s) with /soc@0/display-subsystem@5e00000/dsi@5e94000
[ 19.177802] cfg80211: Loading compiled-in X.509 certificates for regulatory database
Starting Create System Files and Directories...
[ 19.218437] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 19.218939] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
Starting Load JSON user/group Records from Cre[ 19.237533] pwrseq-qcom_wcn wcn3988-pmu: supply vddch1 not found, using dummy regulator
dentials...
[ OK ] Finished Load JSON user/group Records from Credentials.
[ 19.311042] remoteproc remoteproc1: cdsp is available
[ 19.319911] cpu cpu0: EM: created perf domain
[ 19.330021] remoteproc remoteproc2: lpaicp is available
Mounting EFI System Partition Automount...[ 19.340275] remoteproc remoteproc1: powering up cdsp

[ 19.350627] remoteproc remoteproc2: powering up lpaicp
[ 19.351179] remoteproc remoteproc1: Booting fw image qcom/shikra/cdsp.mbn, size 2614680
[ 19.356084] remoteproc remoteproc2: Booting fw image qcom/shikra/lpaicp.mbn, size 1346527
[ 19.374282] cpu cpu3: EM: created perf domain
[ OK ] Finished Create System Files and Directories.
[ 19.413635] Bluetooth: hci0: setting up wcn399x
[ OK ] Mounted EFI System Partition Automount.
[ 19.426843] msm_dsi 5e94000.dsi: supply refgen not found, using dummy regulator
[ 19.438059] /soc@0/display-subsystem@5e00000/dsi@5e94000: Fixed dependency cycle(s) with /soc@0/display-subsystem@5e00000/dsi@5e94000/panel@0
[ 19.453066] /soc@0/display-subsystem@5e00000/dsi@5e94000/panel@0: Fixed dependency cycle(s) with /soc@0/display-subsystem@5e00000/dsi@5e94000
Starting Rebuild Dynamic Linker Cache...
Starting RPC Bind...
Starting Rebuild Journal Catalog...
[ 19.515282] [Firmware Bug]: Unable to handle paging request in EFI runtime service
[ 19.525021] ------------[ cut here ]------------
[ 19.527213] cpufreq-dt cpufreq-dt: failed register driver: -17
[ 19.529810] WARNING: CPU: 0 PID: 460 at /usr/src/kernel/drivers/firmware/efi/runtime-wrappers.c:341 __efi_queue_work+0xdc/0x120
[ 19.529830] Modules linked in: ath10k_core snd_soc_sc8280xp snd_soc_lpass_va_macro ath snd_soc_qcom_sdw mac80211 snd_soc_lpass_macro_common snd_soc_qcom_common libarc4 snd_soc_core soundwire_bus pwrseq_qcom_wcn icc_osm_l3 snd_compress snd_pcm qcom_wdt cfg80211 dp83867 snd_timer snd qrtr soundcore icc_bwmon audiocorecc_shikra hci_uart btqca dwmac_qcom_ethqos stmmac_platform qcom_q6v5_pas stmmac bluetooth qcom_pil_info msm qcom_camss qcom_q6v5 stm_p_basic coresight_stm ecdh_generic stm_core qcom_sysmon qcom_iris coresight_tmc coresight_replicator coresight_cti ecc coresight_funnel qcom_common coresight_tpdm llcc_qcom pcs_xpcs qcom_glink_smem coresight_etm4x qmi_helpers coresight rfkill v4l2_fwnode ocmem videobuf2_dma_contig phylink v4l2_async gpu_sched v4l2_mem2mem videobuf2_dma_sg drm_gpuvm mdio_devres videobuf2_memops drm_exec of_mdio drm_display_helper videobuf2_v4l2 cec fixed_phy qcom_pmic_tcpm videodev drm_dp_aux_bus fwnode_mdio drm_client_lib qcom_spmi_adc5 videobuf2_common tcpm libphy ubwc_config drm_kms_helper
[ 19.547842] aux_hpd_bridge
[ 19.590299] cpufreq-dt cpufreq-dt: probe with driver cpufreq-dt failed with error -17
[ 19.640079] qcom_pon mdio_bus qcom_vadc_common mdt_loader mc i2c_qcom_cci qcom_usb_vbus_regulator dispcc_qcm2290 gpucc_qcm2290 rtc_pm8xxx qcom_spmi_temp_alarm i2c_qcom_geni rpmsg_ctrl qcrypto gpi qcom_stats spi_geni_qcom rpmsg_char qcom_rng sha256 sha1 phy_qcom_qmp_usbc libdes typec socinfo authenc phy_qcom_qusb2 thermal_generic_adc sch_fq_codel drm fuse backlight nfnetlink
[ 19.640164] CPU: 0 UID: 0 PID: 460 Comm: bootctl Tainted: G I 6.18.44-gf7c103b5e1b3-dirty #1 PREEMPT
[ 19.640176] Tainted: [I]=FIRMWARE_WORKAROUND
[ 19.700589] Hardware name: Qualcomm Technologies, Inc. Shikra CQS EVK (DT)
[ 19.700601] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 19.700609] pc : __efi_queue_work+0xdc/0x120
[ 19.700623] lr : __efi_queue_work+0xc8/0x120
[ 19.700630] sp : ffff8000855f3bb0
[ 19.700632] x29: ffff8000855f3bb0 x28: ffff00080ba0b9c0 x27: 0000000000000000
[ 19.727164] x26: 0000000000000000 x25: ffff00080e99b1e0 x24: ffff00080e99b1e0
[ 19.727174] x23: 0000000000000007 x22: ffff00080a8cf400 x21: ffff00080a8cf000
[ 19.727182] x20: 0000000000000020 x19: ffffd3a494f736a0 x18: 0000000000000000
[ 19.749272] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 19.749284] x14: 00000000000003ea x13: 0000000000000000 x12: 0000000000000000
[ 19.749292] x11: 00000000000000c0 x10: 0000000000000c80 x9 : ffffd3a493e7b9f4
[ 19.749300] x8 : ffff00080ba0c6a0 x7 : ffff00087f767b00 x6 : ffff2c63eaded000
[ 19.749307] x5 : ffff00080a83a050 x4 : ffff00080ba0b9c0 x3 : 0000000000000000
[ 19.749315] x2 : 0000000000000000 x1 : 8000000000000015 x0 : 8000000000000015
[ 19.749323] Call trace:
[ 19.749328] __efi_queue_work+0xdc/0x120 (P)
[ 19.749344] virt_efi_set_variable+0x70/0xd0
[ 19.749352] efivar_set_variable_locked+0x58/0x118
[ 19.749359] efivar_entry_set_get_size+0x9c/0x140
[ 19.749371] efivarfs_file_write+0x144/0x240
[ 19.749378] vfs_write+0xd8/0x390
[ 19.749387] ksys_write+0x6c/0x118
[ 19.749394] __arm64_sys_write+0x20/0x40
[ 19.749401] invoke_syscall.constprop.0+0x48/0xf0
[ 19.749411] el0_svc_common.constprop.0+0x40/0xf0
[ 19.749418] do_el0_svc+0x24/0x40
[ 19.749424] el0_svc+0x38/0x118
[ 19.749434] el0t_64_sync_handler+0xa0/0xe8
[ 19.749440] el0t_64_sync+0x19c/0x1a0
[ 19.749449] ---[ end trace 0000000000000000 ]---
[ 19.752636] efi: EFI Runtime Services are disabled!
[ 19.752977] qcom_q6v5_pas b300000.remoteproc: error -22 setting up firmware qcom/shikra/cdsp.mbn
[ 19.753001] qcom_scm firmware:scm: Firmware unexpectedly passed non-zero wq_ctx
[ 19.765409] qcom_q6v5_pas b800000.remoteproc: error -22 initializing firmware qcom/shikra/lpaicp.mbn
[ 19.765451] remoteproc remoteproc2: can't start rproc lpaicp: -22
[ 19.766966] remoteproc remoteproc1: can't start rproc cdsp: -22

Starting Record System Boot/Shutdown in UTMP...
[ OK ] Finished Update Boot Loader Random [ 19.946306] Bluetooth: hci0: QCA Product ID :0x0000000a
Seed.
[ 19.956674] Bluetooth: hci0: QCA SOC Version :0x40020140
[ 19.963268] Bluetooth: hci0: QCA ROM Version :0x00000201
[ 19.969440] Bluetooth: hci0: QCA Patch Version:0x00000001
[ OK ] Finished Automatic Boot Loader Update.
[ 19.996641] Bluetooth: hci0: QCA controller version 0x01400201
[ 20.002855] Bluetooth: hci0: QCA Downloading qca/apbtfw11.tlv
[ OK ] Started RPC Bind.
[ OK ] Finished Rebuild Journal Catalog.
[ OK ] Found device /dev/tee0.
[ OK ] Finished Record System Boot/Shutdown in UTMP.
[ 20.066519] tpm_tis_spi spi0.0: probe with driver tpm_tis_spi failed with error -110
[ OK ] Reached target Hardware activated USB gadget.
Starting Virtual Console Setup...
[ OK ] Finished Virtual Console Setup.

Activity

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Metadata

Metadata

Labels

No labels
No labels

Type

No type

Projects

No projects

    Milestone

    No milestone

    Relationships

    None yet

    Development

    No branches or pull requests

    Issue actions