[QLI2.0] anx7625_i2c_probe : fail to write/access i2c

[sgaud-quic]

Kernel : qcom-6.18.y
LAVA : https://lava.infra.foundries.io/scheduler/job/442982

[   15.060229] dummy 19-003f: [drm:i2c_access_workaround.isra.0 [anx7625]] *ERROR* fail to access i2c id=3f
[   15.060229] :39
[   15.060319] dummy 19-003f: [drm:anx7625_i2c_probe [anx7625]] *ERROR* fail to write i2c id=3f
[   15.060319] :43

[arpit-dev-geek]

Above erros are non-fatal and caused by the below bridge register access in the probe.

anx7625_i2c_probe
...
if (platform->pdata.intp_irq)
anx7625_reg_write(platform, platform->i2c.rx_p0_client,
INTERFACE_CHANGE_INT_MASK, 0); // INTERFACE_CHANGE_INT_MASK = 0x43

This was introduced in the below patch:

drm: bridge: anx7625: implement minimal Type-C support
https://lore.kernel.org/all/20260121-anx7625-typec-v2-2-d14f31256a17@oss.qualcomm.com/

Looks like register access is happening without powering ON the bridge chip. The errors are non-fatal and should not impact functionality.
I have identified a potential fix, will test and post for review

[sgaud-quic]

Fixed with : #1185