[davmoz]

Summary

saj-emanager 0.1.2 passes the NovaCore device-support registry check that rejected 0.1.1.

• host.set_make("SAJ") is now host.set_make("saj"). The registry matches make against the lowercase brand key from /brands. This is the same correction the SAJ H2 driver took in 1.0.2. The catalog manufacturer string stays SAJ.
• host.emit_metric is not a host function in that registry (FTW has it; the registry allowlist does not). The calls are gone. Device count and the phase voltage/frequency divisor are one host.log line each. Inverter, load, generator, raw battery capacity, and the FeedIn/Sell counters are not published: the first three have no stated sign, capacity is not a known Wh unit, and FeedIn versus Sell is still an open direction question.

sha256: db7692001df4fcd19130c1a7e5b0f61f425f519bf2ba92be4ae1371c345da792
size_bytes: 24245

Still read-only. Still not run on hardware.

Driver evidence

• Driver id: saj-emanager
• Device make/model: SAJ eManager C1 Pro
• Firmware tested: none
• Protocol/register source: unchanged from Add read-only SAJ eManager C1 Pro driver #210
• Hardware test performed: none. make test-driver ID=saj-emanager and make check
• Known limits: read-only; wire signs unverified; no metric channel for the unpublished counters

Safety

• The driver starts read-only, or this is a separately reviewed control change.
• Vendor signs are converted at the driver boundary.
• Cached telemetry becomes stale instead of being re-emitted as fresh.
• No credentials, serial numbers, private addresses or site data are included.

Control evidence

Not applicable. No writes.

• HIL evidence or required: not applicable (read-only)
• Control changes include default-mode, lease-expiry and HIL evidence. — not applicable

Checks

• Commits include Signed-off-by.
• make test-driver ID=saj-emanager
• make check